亚洲黄色网址,av天堂岛,亚州性爱AV,黄色成人动漫网站AV,亚洲另类视频

LABEL PRINTING MACHINE

LQ-JD-P+ Series Offset and Flexo Combination Printing Machine

Features

·Hybridprintingwith offsetunitand flex unit,high overprinting precision,perfect offset printing dot delicate,strong sense of layer. Flexo ink layer thick, strong hidingpower characteristics. Printing products have anti-counterfeitingability with high technology.

· The structure of water and ink was been designed according tothe heavy-duty offset press，so that water andink balance is faster，ink ismore stable,layoutismore flat.

· The UV drying bottom roller with water cooling eliminates the deformation of the substrate material during drying,and ismore suitable for film printing.

· The printing material is wider. Cardboard，film，self-adhesivelabel，metal foil,cotton paper and etc. can be printed.Thethicknessrangeofthesubstrate is large, from 0 . 0 2 \mathsf {mm } ( \mathsf { f i l m } ) to 0 . 3 5 {mm } (cardboard).

?Automatic overprinting system,especially for more than one unit overprinting superior to other systems.Reserveoffsetcold foil module.

Specifications

M

Note:therighttomodifytheappearanceandparameters,theactualprintingspeedandefectisalsosubjecttotheoperator

ZHR-370/450/530/660 Unit Type Flexo Printer

Features

Machine adoptsthelatest servo control and operationsystem,eachunitisdrivenbythreeservomotor.The machine isentirelycontrolledbyservo.Foreachmachine,there are45 servo drivers, 12-color, 3 die cutting stationsand conveyingplatform,ensuring high precisionandstability during the machine runs in high speed.

· Anvil roller equips with water chiller，ensure not affect by UVcuringtemperature when printing film material.

· Printing roller adopts air support shaft sleeve system， sticksleeve or carving sleeve control by servo (without gear) easy, convenient and fast to change the sleeve. The printingcylinder without gear,which improved the printing qualityand reduce the maintenance.

·Unwinding unit equips with corona，dust， static electricity system,ensure the stability before printing.

· Printing and ink transfer pressure adjustment: printing rolleradopt rolling pillow,only need to fine-tune the corresponding support frame on both side.When changenew printing cylinder no needbig adjustment， some special printing requirement also only need a litle fine-tuning， theprinting eficiency greatly _improved.

The printingprocessis equipped witha high-precision webguide and video monitoring equipment，providinghigheras surance for label printing.

Specifications

》

ZHH-320/450/570/660/850/950 Flexographic Printing Press

Features

This machine is upgraded machine from ZHH serial, it has the characteristics of fast speed, stable registration and easy operation. This machine adopts the latest inovance servo system, the whole machine has 13 servo motors to control (8 colors 1 die cuting forexample),equipped with web monitoring, turn and so on.It is the bestchoice for printing high-grade commercial labels.

Specifications M

LQ-J380F-4C/7C 4/7-Color Intermittent F + Web Guider + Rotary Die Cutting + Cl

Features

Precision Semi-Rotary Design Versatile Production Capability

·Featuresfixedmain-axisplaterollerswith no disassembly required, ensuring high registrationaccuracyand consistent print quality.

· Designed for small-lot,multi-varietyapplications while also supporting mediumto long-run jobs with speedsup to 6 0 m / { { m i n } }

Comprehensive Inline Functions (Optional)

·The press can be equipped with advanced inline functions including: Corona treatment, Dust removal， Cold foil stamping，Standard lamination，Multi-layer lamination，Glue-side printing, Varnishing,Rotary die cuting,Sheet cutting, Sliting, CCD camera inspection,Automatic material lifting system.

lexo Label Printing Machine CD Camera

Fast Job Changeovers

?Enablesrapiddisassemblyand reconfigurationof each printingunit in just threeminutes, ideal for short-run, high-frequency jobs. It truly embodiestheconceptof"short, frequent,and fast."

Innovative Plate-Mounting

·Unique plate-mounting design,ensures bubble-freetapeapplication，preciseandeven platealignment for superior print accuracy.

User-Friendly Operation

·Equippedwitha pre-registrationsystem for quick setup and stable output, reducing operator workload and boosting efficiency.

Future-Proof Expandability

· Optionally equipped with an independent power box to allow easy future upgrades with additional printing units.

ZH-P350-6C Offset Printing Machine

M IMLE

ZHS-320G/450G/570G Label (logo) Flexo Printing Machine With Three Die-cutting Stations

Features

?Adoptthe ceramicaniloxcylinderto transfer the ink. ? Each printing unit adopts 36o0 plate-adjustment. ·Three die-cutting stations, the first and second die-cutting stationcan do double sides working，the third die-cuttingstation canbeusedassheeter. ? Ultrasonic web guider is installed in the front of printing unit,itensures thematerialalwaysintheright position. (standardconfiguration) ?After sheeting in the third die-cutting station,conveyor belt canoutput the products orderly. (option)

· Unwinding and rewinding tension areauto-controlledbymagneticpow der,two rewindersis possiblein this machine.
Video inspecting system isan option, it can watch the printingqualitywhenin highspeed.
·The ink rollers will be separated fromthe printing roller,and keeprunningwhen the machine stops.
·Mainmachine inverterisimported. The machine can finish material-feeding, printing, varnishingdrying, laminating， die-cutting，rewinding and sheeter in a lump. It isan ideal machine forprinting note and

ZHS-320/450/570 Label (logo) Flexo Printing Machine

Specifications 》

Features

· Adopt the ceramic anilox cylinder to transfer the ink.
·Unwinding and rewinding are controlled by magnetic powderbrake/clutch.
·Each printing unit adopts 3 6 0 ^ { \circ } plate adjustment,
? Each printing unit equips with iR dryer.
This machine with one die-cutting station, which makes printing anddie-cutting can be finished in one precess.
·Theinkrollerswillbeseparated fromtheprintingrollers,andkeeprunningwhen themachine stops.
·Themainmachineinverteris imported.
·The machinecan finishmaterial-feeding,printing,varnishing,drying,laminating,rewinding and die-cuting ina lump.Itis an ideal machinefor printingnoteand top-gradeadhesive label.

ZHMQ-350/450 High Speed Flatbed Die Cutter

Features

High Speed Label Die Cutting Machine,powered by servo control system& Schneider low-voltage electricals, delivers 1 2 0 { { m / m i n } } high speed, ± 0 . 1 0 {mm } precision, 3 5 0 {mm } max web widthhighly automated, stable & tension-controlled for label production, supporting optional die cutting, sheet cutting & laminating.

Specifications M

Auto Die Cutting Machine ForSelfAdhesiveTrademark

Features

Themachine adopts accurate flatten die-cutting system,material towing iscontrolledbyservo motor，three photocells dothe web-guidingjob. Die-cuting, waste rewindingand rewinding (orsheeter)can be finished in

one process.It's suitable fordie-cutting adhesive paper,dacron label and laser hologram mark. This is the ideal association equipment for flexo printing machine,silk screen printing machine, gravure printing machineand hologram mark printing machine.It's the most effcientmachine for printing house.

Specifications 》

ZHFQ-350/450 High Speed Label Slitter

Features

The machine adopts the Inovance control system of China andthe France Schneiderlow-voltage electricappliance.The machine is running at a constant speed and the tension is stable. Has the advantages of high degree of automation, high speed, stablepressure, and the like.

Specifications

ZHD-320G/450G/570G Automatic Slitting Machine

Features

ZHD-320G Slitting machine with rotary die-cutting function is a new product,it equipped with high accurate rotary die-cuting system.This machine is suitable forblank adhesive labels.Die-cutting laminating (option),slitting canbe finished in one process.It has the function of automatic meter counting,automatic stop,web guiding by photocell.The machine has the characteristic of compact structure.fast speed,high efficiency,easy operation,accurate sliting and steady running etc.

Specifications

ZHD-320/450/570 Slitting Machine With RotaryDie-cutting Station

Features

ZHD-320 Slitting machine with rotary die-cutting function is a new product, it equipped with high accurate rotarydie-cutting system. Thismachine is suitable for blank adhesive labels. Die-cuting, laminating (option)， slittingcan be finished in one process .lt has the function of automatic meter counting， automatic stop, webguiding by photocell. The machine has the characteristic of compact structure， fastspeed，high efficiency， easy operation, accurate slitting and steady running etc.

Specifications M

ZHD-320G/450G/570G

Automatic Slitting Machine

Features

ZHD-320G Slitting machine with rotary die-cutting function is a new product,it equipped with high accurate rotary die-cutting system. This machine is suitableforblankadhesivelabels. Die-cutting laminating (option)， slitting canbe finished in one process.Ithas the function of automatic meter counting, automatic stop, webguiding by photocell.Themachine has the characteristic of compact structure.fast speed，high efficiency，easy operation, accurate slitingand steady runningetc.

Specifications 》

SHANGHAI UPG INTERNATIONAL INDUSTRY&TRADE GROUP CO.,LTD

ADD:23RDFLOOR MECHANICAL&ELECTRICALMANSIONNO.600 HENGFENG ROAD,SHANGHAI 200070.P.R.CHINA

Tel:0086-21-63173900 0086-21-63530603

Fax:0086-21-63538343

ewww.shanghai-upg.com

eWEBSITE

区E-mail:sales@shanghai-upg.com 2026-市场部标签机合集-V1

WECHAT