亚洲黄色网址,av天堂岛,亚州性爱AV,黄色成人动漫网站AV,亚洲另类视频

CONTENTS

目录

公司介绍 Company profile 5
车间风采Workshop 9
发展历程History 11
合作伙伴 Customers 13
荣誉资质 Certificates and Patents 15

振动试验机系列

VIBRATIONTESTSYSTEMS

原理与选型 Principle and model selection 19
风冷振动试验机Air Cooled Vibration TestSystem 21
水冷振动试验机 Water Cooled Vibration Test System 27
综合环境试验系统 Vibration Combined Environmental Test System 37
数字控制器 Digital Vibration Controller 41
标准振动试验机Standard Vibration Test Systems 44

跌落试验机系列

冲击试验机系列

SHOCKTESTSYSTEMS

冲击试验机 Shock Test System 47
高加速度冲击试验机 High Acceleration Shock Test Systems 51
斜面冲击试验机 Incline Impact Test Systems 55
碰撞试验机 Bump Test Systems 57
冲击/跌落测量系统 Shock/Drop Measurement Systems 59

DROPTESTER

零高度跌落试验机Drop Tester for Heavy Package 60
包装跌落试验机Drop TestMachine 61
便携式产品跌落试验机Drop Test Machine for Portable Gadgets 63
释放抓钩 Release Hooks 64
产品应用Applications 65
展会与研讨会 Exhibitions and Seminars 69
公司活动 Company Activity 70

VIBRATIONTEST

SYSTEMSERIES

振动试验机系列

02

工作原理与选型风冷振动试验机

VV VV VV VV vV

水冷振动试验机综合环境试验系统标准振动试验机 Standard Vibration TestSystems

Principle and model selection

工作原理与选型

THEWORKINGPRINCIPLEOFVIBRATIONEXCITER

激振器工作原理

CALCULATETHEREQUIRED EXCITATIONFORCE

F=(M0+M1+M2)×A×1.3

计算所需的激振力

Sine Force正弦推力(p-p)1.3:SafetyFactor(安全系数)
FExcitingForce激振力(kgf)RandomForce随机推力(Rms)
M0Armaturemass动圈重量（kg)=sine Force/√2
M1AuxiliaytableorFixture平台或夹具重量（kg)ShocForce冲击推力
M2Specimen待测物件重量(kg)=SineForce\*2正弦推力\*2
A加速度g注：当采用重力单位时，加速度单位为g，激振单位为kgf，其中1g=9.8m/s2；
Whenusinggravityasunit,theaccelerationunitisg，excitingforceunitiskgf,1g=9.8m/s2；

TESTREQUIREMENTSANDMODELSELECTIONGUIDE试验条件与基本系统选型指导

要选择一个适当的振动试验系统，最重要的是知道履行一个振动试验需要的激振力，评估计算激振力需要了解以下的试验规格：

Tochooseasuitablevibrationtestsystem,themostimportantthingistoknowtheexcitingforcerequiredtoperformthe vibration test.Toevaluateandcalculatetheexciting force,thefollowing testspecificationsshouldbeknown:

\bullet 清晰的试验条件ClearTesting Requirements \bullet 频率(频率范围) Frequency (Frequency Range) \bullet 最大的加速度MaximumAcceleration

\bullet 最大的位移MaximumDisplacement0 最大的速度Maximum Velocity0 试件和治具 SpecimenMassandFixation

需要根据试验频率的 上限和尺寸来选择一 个夹具（垂直扩展平 台）或水平滑台，需要 用其质量来评估振动 试验所需要激振力。

Thespecimen fixture isselected based on the upper limitof test frequency and specimen size, either vertical expansion platform or horizontal sliptable.Specimenmassis neededtoevaluatetherequired exciting forcefor vibration test.

评估动圈的质量(EVALUATIONOFARMATUREMASS)

评估振动试验需要的激振力时，您可以选择一个临时的动圈质量（根据EV系列的型号）。

Whenevaluating theexciting forceneededforvibration test,youcanchoosea temporaryarmature mass (according to the model of EV series)

VIBRATIONTESTMACHINESELECTIONGUIDE 振动试验机选型指导

AIRCOOLEDVIBRATIONTESTSYSTEM风冷振动试验机

EV系列电磁式振动试验机在实验室条件下模拟机械振动环境测试各种振动试验应用领域中的冲击强度和可靠性。在实验室借助振动试验机系统可以模拟再现正弦、随机、谐振搜寻与驻留、典型冲击和道路仿真等环境。对于产品的质量保证、新品研发都是必不可少的。

EV系列电磁式振动试验机经特殊设计满足长时间工作，加装耐振底座可实现垂直和水平方向振动。标准的台体安装了高效气囊隔振震装置，使振动传递到建筑物的振动降到最低，同时在大多数情况下不需要额外地基，

振动台、功率放大器和振动测控制系统组成了一套完整的振动试验系统，依照相关的国家和国际标准。如：MIL-STD、DIN、SO、ASTM、IEC、ISTA、GB、GJB、JIS、BS等为用户建立产品质量检验提供技术保障。

EVseriesof electromagnetic vibration testing systemsimulate the vibration environment under the laboratory condition, and test the impact strength aswell as reliability of various vibration testapplications.In the laboratory,with theaid of vibration testing system,simulations of reproduction of sinusoidal, random,resonant search and dwell,classical shock and road models,etc.can be achieved.It isessential for product quality assurance, new product research and development

EVseries of electromagnelic vibration testing system is specially designed to meet the need for long time operation. Vertical and horizontal vibrations can be achieved by the installationofvibration resistantbase.The st:andard platform isequipped with high efficiencyairbag shock isolationdevice, so that the vibration transmitted to the building can be minimized.There is no need for additional foundation in most of the cases.

A complete set of vibration testing system is composed of shaker,power amplifier and vibration measuring control system,in accordance with the relevant national and international standards (such as: MIL-STD,DIN,ISO,ASTM, IEC, ISA, GB, GJB,JIS,BS,etc.) to provide technical support for establishing product quality inspection

THEPRINCIPLESOFOPERATION振动试验机工作原理

坚强之悬挂系统与直线运动导向，承载能力强，导向性能好，稳定度高。

高效率DClass功率转换，3-Sigma峰值电流，提供最优化的功率消耗和最小的谐波失真。

HighefficiencyDclass powerswitching, 3-sigma peak current,harmonicdistortion.

06
快速自检诊断及连锁保 护，安全可靠度高。
Quick self-diagnosiswith safety interlock, highsafety reliability. 05
提供水平及垂直扩展平 台之不同运用
Horizontal and vertical expansionplatforms for different applications.

Airbag shock isolation device for vibration platform without the need of additional foundation,perfect reproduction of vibrational wave and reduction in vibration transmittance.

控制器的选用搭配提供最简易操控。

AIRCOOLED SHAKERSYSTEM风冷振动系统

可选项Options:

水平滑台 SlipTable 33-34
垂直扩展台 Head Expanders .35
辅助装置 Auxiliary device.. 36
振动控制器 Vibration controller ·41-43

INSTALLATIONREFERENCEDRAWING安装参考图

冷却风机建议放置室外电源要求：三相五线AC380V，配置空气开关（大小以实际选择的设备大小决定）

气源要求：0.6-0.8MPa

注意：独立接地，接地电阻少于4Ω，如果电源电压变动较大>380V/±%10，请自行配备稳压器

The air blower is recommended to be placed outdoors

Powersupply requirements:three-phase, five-wire,AC380V,50/60Hz,airswitch (the size is determined by the actual device model)

Air Supply requirements: 0.6-0.8 Mpa

Note:independent grourding,connection resistance is less than 4Ω,if the power supplyvoltagechange is larger than 3 8 0 \mathsf { V } > ± 1 0 % . please provide your own voltage regulator

DIAGRAMDRAWINGOFCOOLINGBLOWERPLACEMENT风机放置参考图

振动试验过程中，会产生噪音。振动试验的噪音可分为加振噪音、散热风道噪音、冷却风机排出噪音、功率放大器的风扇噪音。

Duringthevibration test,noisewillbegenerated.Thenoiseofthevibrationtestcanbedividedintothevibrationnoise, theairintakenoiseofthevibrationgenerator,thecoolingfan,thecoolingfandischarge noise,andthefannoiseof the power amplifier.

OUTDOORSCHEMATICDIAGRAMOFFANPLACEMENT风机放置室外参考图

NOISEREDUCTIONMETHODS减少噪音方式

WATERCOOLEDVIBRATIONTESTSYSTEM水冷振动试验机

WATER-COOLEDSHAKERSYSTEM水冷振动系统

可选项Options:

水平滑台 SlipTable 33-34
垂直扩展台 Head Expanders ..-35
辅助装置 Auxiliary device. 36
振动控制器 Vibrationcontroller 41-43

AirCooledShakerSiZE

风冷振动台体尺寸

HORIZONTALSLIDING TABLE(HST)水平滑台

水平滑台可以与各种规格的振动台配合，实现水平方向测试。

倒台系统采用涡轮转动系统，个人能单独轻松地转动振动台台体与水平滑台连接。利用机械限位装置可以确保水平滑台与振动台的连接水平滑台主要由水平模块、连接头、水平滑台基座、油源组成.

HG系列水平滑台适用于常规的负载试件。

HB系列水平滑台具有较高的倾覆力矩和横向限制，适用于测试重心较高、重量较大的负载试件；
HT系列水平滑台主要适用于大尺寸试验件的水平振动试验，可以提供比HB系列更大的承载力和抗倾覆力矩。 TheHorizontalSlideTable(HST)canbematchedwithvariousspecificationsoftheshakertoachievehorizontaldirectiontest. Theshakerusesaelectricrotationsystem,andindividualscaneasilyrotate thevibrationexciterandconnecttheslidingplate The mechanicalimit devicecan ensure the connection between the vibration exciterand the sliding plate.
TheHSTis mainlycomposedofahorizontalmodule,aconnecting head,aHSTbaseandamedium/high pressureoilsource. HG series HST is suitable for conventional load specimens.
HBseriesHSThas highoverturning momentandlaterallimit,whichissuitablefortestingloadspecimenswithhighcenterof gravity and large weight.
HTseries HSTis mainly suitableforhorizontal vibration testof large size testpieces,which canprovide greaterbearing capacity and anti-overturning moment than HB series.

油膜滑台是利用一块精确研磨表面的天然花岗岩和一个镁合金材料的滑台在油膜之间活动组成 Oilfilm slip table is composed of a precisely ground natural granite and magnesium alloy

命名信息 举例：HG100M

材料代码M:镁MagnesiumA:铝Aluminium (Al)
尺寸代码：常规方型 长X宽 例如：100100cmX100cm非常规长条形轴向X宽例如：1512150cmX120cm
导向机构代码：G--常规导向滑轨-T型GuidesliderailB--B型高压轴承B-type High-pressure bearingT--T型中压轴承T-type Medium pressure bearing
产品类型代码：H-水平滑台Horizontalslidingtable

HEAD EXPANDERS(HE)垂直扩展平台 (组件)

VT系列扩展台面为垂直方向测试提供比动圈更大的安装台面。扩展台面由质量较轻的镁合金或铝合金材料制作而成，具有较高的强度重量比。

配有载荷支撑导向的扩展台面可以可靠的安装和测试大尺寸的试件，降低损坏振动机悬挂系统的风险。带导向扩展台面可以用于模拟在恶劣的运输条件下，对大而重的设备进行测试，还可以利用增加了额外限制条件和负载的、测试条件较为苛刻的设备进行测试。

夹具工装一般是按照测试样品的安装要求去度身定制。常规的有立方型、L型和T型夹具工装都可以用于对多个小规格试件的测试。立方型、L型和T型的夹具工装也是三轴向的测试的首选，通过改变试件的方向而不需要增加水平滑台。

The VTSeries HEprovidesalargermounting table thanthearmatureforverticaltest.The HEis madeoflighterweight magnesium oraluminum alloy material and has a high strength-to-weight ratio. HE with load support guides enablereliableinstalationand testingoflarge specimens,reducing theriskofdamage to the vibratorsuspension system.Guided HEcan beused to simulate the testing of largeand heavyequipmentunder harshtransportationconditions,swellastestingofmoredemanding equipmentwithadditionalconstraintsand loads. Fixture is generally customized according toteinstalationrequirements ofthe testsample.Conventionalcubed, L-shaped andT-shapedfixturescan be usedtotestmultiplesmalsize specimens.Cubed,LandTfixtures arealso preferredfortriaxialtesting bychangingtheorientationofthespecimenwithouttheneedtoaddaHorizontalSlideTable.

AUXILIARYDEVICE辅助装置 (组件)

空气弹簧支撑 Air spring support

FIXTURE夹具 (组件)

辅助导向装置Auxiliary guide

本公司可以依据客户实际使用需求提供立方体，L型和T型等多种夹具和特殊的附属装置供客户使用。

According to customers actual demand, we can offer different shapes of fixture, such as three-dimenesional square,Land T shape.

VIBRATIONCOMBINED

ENVIRONMENTALTESTSYSTEM

综合环境试验机

综合环境试验系统主要是试验箱和振动试验系统的综合，试验时将温度、湿度、振动（高温或低温），（正弦振动或随机振动）以及电应力按规定的周期综合在同一气候试验箱中施加到样品上进行温度、湿度、振动的“环境仿真”试验。与单一环境因素相比，更真实地模拟产品在运输与实际使用环境。是考核、评定产品对环境变化的适应性、暴露产品的缺陷，是新产品研发、鉴定、批量生产全过程的重要试验手段，我们可以依据客户不同的试验需求，提供范围广阔的综合环境试验系统，如三综合、四综合试验设备方案（风冷振动试验系统配低气压试验箱）、多轴振动试验系统和最新试验技术。

The Combined Environmental Test System isa combination of test chamber and vibration test system,whereby different temperature (high/low temperature),humidity,vibration (sinusoidal/random) and electrical stressare applied on the specimen according to the preset period to perform "Environmental Simulation"of temperature,humidityand vibration.As compared to single environmental factor test, this test can simulate the products in transport and operation environmentsmore realistically.It isan important test method for the whole processof newproduct researchanddevelopment,identificationand mass production.We can providea wide range of comprehensive environmental test system according to different test needs of customers.Such as three comprehensive, four comprehensive test equipment scheme (air-cooled vibration test system with low pressure test chamber),multi-axis vibration test system and the latest test technology.

CONNECTION MODE BETWEEN

SHAKERANDCHAMBER

振动台与环境箱连接方式

A振动台与试验箱直接连接

Shaker connected with chamber directly

B振动台与试验箱通过过渡头连接

Shakerconnected with chamber bya transition connection

C振动台与试验箱通过平台连接

Shakerconnected withchamberbya table

D振动水平方向与试验箱连接

Vibration horizontal direction connected with chamber

BASICKNOWLEDGEVIBRATION

振动基本知识

振动原理Vibrationprinciple

振动的基本原理都是幅度随着时间变化的正弦函数，通常可以用加速度；位移；速度，这些物理量来表示振动的是水平。

Thebasicprincipleistheamplitudeofthevibrationofasinefunction withtime,allyitccelerion;iscemet;ed,. quantitiestorepresentthevibrationishorizontal.

正弦曲线参数示意Parametersofsinecurve

Period(周期)t=1/f(f:Frequency)
Single Amplitude(单峰值）(0-p)
DoubleAmplitude(峰峰值)(p-p)=SingleAmplitude(单峰值） ( 0 - p ) x 2
Root-mean-squareValue(均方根值) (rms)=SingleAmplitude (单峰值) ( 0 - p ) x 1 / sqrt { 2 }
AverageValue(平均值) (Ave)=SingleAmplitude(单峰值） ( 0 - p ) x 2 1 π
基本公式y(t)=Asinawt(w:AngularFrequency角频率）

正弦扫频试验Sinesweeptest

以某种规律连续改变频率激励试验品，目的是在评估的频率范围寻找引起谐振的特有频率。

Somelawcontinuouslychanging frequency ofthe excitationtest product,aimedatthe
assessmentof thefrequencyrangetofindcause-specificresonance frequency.

主要参数Main parameter

■Frequency频率[Hz].试验时间TestTime[t]■Acceleration加速度 [ \mathsf { m } / \mathsf { s } 2 ] ■SweepRate扫频速率(oct/min),[Hz/min]

电子电工产品在运输过程所受的振动绝大多数是随机性质的振动，随机振动比正弦振动的频域宽，且是一个连续的频谱，它能同时在所有的频率上对产品进行振动激励，真实克隆现实环境。

Thevibration experienced byelectricaland electronic productsduring transportation ismainly randomtype.Therandomvibrationhaswiderfrequencydomainthansinusoidalvibrationanditis acontinuousspectrum.Itcansimultaneouslyexcite the products using vibration ofalfrequency andclone the realenvironment.

主要参数Mainparameter

总均方根值OverallRMSValue(rms)[Grms] 功率谱密度值PowerSpectralDensity(PSD)[g2/Hz] 试验时间TestTime[t]

冲击与碰撞都属于冲击范畴，规定冲击脉冲波形的冲击试验，主要用来确定元件、设备和其他产品在使用和运输过程中经受多次重复（碰撞则是多次重复）机械冲击的适用性及评估包装保护。

Theimpactandcollision impactallbelong tothecategory,provisionsofshockpulseimpacttest is used to determine the main components, equipment and other products in the use and transportationprocesssubjectedtorepeated (colision isrepeated)andevaluate theapplicaility of packaging to protect the mechanicalshock.

主要参数Mainparameter

■脉冲类型MainShockPulse ■Post-load[%]P2 p2=B2/A\*100[%]■Pre-load[%]P1p1=B1/A\*100[%] ■速度Velocity[m/s]V■脉冲宽度ShockPulse Duration[s]t ■峰值加速度Acceleration[m/s2]A

RELATIONAMONGACCLERATION,VELOCITYANDDISPLACEMENT加速度、速度与位移之间的关系

关系Relation Accelerationa[m/s]=(2πf)d/1000=2πfv Velocityv[m/s]=2πfd/1000=a/2πf Displacementd[mm]=1000a/(2πrf)=1000v/2f 方程估计Equationfor Estimation A[m/s]0.0394df※1 6.28fv※1 V[m/s] 0.00628fd 0.159a/f※1 d[mm]25.5a/f※2 159.2v/f

Dividetheaccelerationvalueby9.8whenitsunit isG 2Multiplytheaccelerationvalueby9.8whenitsunitisG

UNIVERSALINTERNATIONALUNITS国际通用单位

THETERM术语

换算公式Conversionformula
力（F)Force:1kgf=9.80665N1kgf=2.2lbf长度Length:1inch25.4mm
重量（kg)Weight:1kg=2.2lbs速度Velocity:1m/s=39.37in
加速度Acceleration:1g=9.80665m/s2

1PowerSpectralDensity功率谱密度单位带宽所具有的平均能量，它描述振动过程在不同频段的能量分布；

■OverallrmsValue总均方根值加速度功率谱密度曲线在其规定的试验频率区间的曲线（功率谱）下面积的平方根，但不要将其跟正弦振动的峰值进行比较，他们之间没有任何关系。

1Pre-Pulse（前脉冲），post-pulse（后脉冲）在主脉冲的前后分别增加前后补偿脉冲的作用是使速度和位移最后回归到零的位置

■Theaverage energyof PowerSpectral Density hastheunitsof bandwidth,which describestheprocessinthevibrationenergydistributionindifferentfrequency bands;

OverallrmsValuecurve initspredeterminedtestfrequencyrange (powerspectrum) underthesquarerootofthearea,butdoitwiththepeaksinusoidalvibrationwere compared, there isno relationship between them;

■Pre-Pulse,post-pulse,respectively,beforeandaftertheincreaseinthecompensationpulse beforeand after themain pulse isthe role of the velocityand displacement finally return to the zero position.

Guidance使用指导

位移d、加速度a频率f关系 速度 v . 频率f、加速度a关系

The relationship among displacement, acceleration and frequency.

The relationship
among velocity,
frequency and acceleration.

速度V、频率f、位移d关系

The relationship among velocity,frequencyand displacement .

D:位移Displacement \mathsf { v } \colon 速度Velocity a:加速度 Acceleration f:频率 Frequency

DIGITAL VIBRATIONCONTROLLER

数字振动控制器

VCS系列振动控制器具有全系列的振动试验功能，能够在电动或液压振动台上实现随机、正弦扫频、谐振搜索和驻留、典型冲击、正弦加随机、随机加随机、在宽带随机下实现窄带随机加正弦、冲击响应谱控制、瞬态仿真、道路谱模拟等振动试验。控制软件运行在Windows下，界面友好，操作便捷；同时系统还提供完善的试验进程管理、数据指示和试验报告生成等功能，使得测试更加方便、可靠。

振动控制仪采用模块化设计和分布式数据处理方案，非常容易进行通道及试验功能扩充。32位高速双DSP处理结构、低噪声电路设计技术、24位A/D和D/A硬件，高速数据通讯电路组成，采用自适应控制算法的控制软件功能强大，将振动控制系统技术性能提高到一个全新的水平。

随机Random

VCS series vibration controller has the full range of vibration test function,which can achieve vibration tests,such as random,sinusoidal sweep,resonance search and dwell, classical shock,sinusoidal-random,random-random,narrowband random-sinusoidal, shock response spectrum control, transient simulation,and road spectrum simulation on electro-dynamic or hydraulic vibration table.Control software is performed in Windowswith friendly interfaceand convenient operation.At the same time,the system also provides perfect testing process management,data instructions and test report generation,making the test more convenient and reliable.

Vibration control system adopts modulardesign and distributed data processing program to carry out the expansion of the channel and test function easily. Composed of 32-bit high speed DSP processing structure,low noise circuit design technology,24 bit A/Dand D/A hardware, high-speed data communication circuit.The control software of the adap tive control algorithm is powerful,and promotes the technical performance of vibrational control system to a new level.

典型冲击 Classic Shock

正弦Sine

内置ICP恒流源和电荷放大 自动或手动生成 Automatically or manually generate WORD test report.
器，电压和电荷输出型振动 WORD试验报告，用 Users can self-customize
传感器可直接接入系统ure 05 户可定制报告内容 report content.
and charge amplifier.Vibration 小量级信号检查系 Small signal in checking the
sensor of voltage and charge output performance of the system
can be directly connected to the 统控制环性能、测 control loop and test system
system. transfer function 试系统传递函数

SPECIFICATIONS

VIBRATIONTESTSYSTEMS

标准振动台

Et系列标准振动台具有重量轻、体积小，移动方便，可广泛用于加速度传感器校正、微小零件的耐振试验、疲劳试验和机械阻抗的测试，同时也可用于教学科研以及实验室。

Withlightweight,smallvolume,onvenienttoove,ETseriesstandardbrationtableisidelyusedinteacceleatiosn sorcalibration;vibrationtestfatigue testandmechanicalimpedancetestofmicroparts;atthesametime,theETsriescanalso be used for teaching and scientific research and laboratory.

FEATHRES

特点

01于高精度的振动仪的校正，机械阻

用于振动工程学的基础试验02 等教育器材。

Apply to the calibration of high precision vibration meter, mechanical impedance test, and vibration analysis of the vibration source.

Apply to the vibration test of various small and lightweight parts such as sensor, electronic,electric machines and etc.

用于各种各样的传感器、电子、 03 电气机器等小型轻量的被试验品 的振动试验。 Apply to educational equipment for the basic test of vibration engineering.

SPECIFICATIONS

SHOCKTEST SYSTEMS SERIES

冲击试验机系列

03

冲击试验机 ShockTest Systems

高加速度冲击试验机 HighAccelerationShockTestSystem

斜面冲击试验机 Incline Impact Test Systems

碰撞试验机 BumpTestSystems

冲击/跌落测量系统 Shock/DropMeasurement Systems

SHOCKTESTSYSTEMS

冲击试验机

产品在生产、运输、装卸、使用过程中，总会不可避免地受到冲击、碰撞、自由跌落、翻倒等作用，这些均是瞬态激励作用在物体上，使得物体在瞬间产生很大的速度、加速度、应变速率等力学特征量，完全不同于物体在静态载荷下受到的作用，使得物体在结构强度和性能稳定性方面发生故障，乃至失效。因此很有必要对冲击作用进行研究和冲击环境的再现，来考核物体在冲击环境下的结构强度和性能稳定。

Productsare inevitably affected by impact,bump,free fall, tumbling,etc.during production,transportation,loading and unloading as well as during the use of the products.All of these are transient excitation on the object,causing the object to produce mechanical characteristics of high speed, acceleration,strain rate,etc instantly.These kind of characteristicsare completely different from that in static load,and may cause problems to the object in terms of structural strength and stabilityand sometimes the object may fail.Therefore,it is necessary to study the effect of impact and reproduce the shock environment, to assess the structural strength and performance of the object under shock environment.

THEPRINCIPLESOFOPERATION冲击试验机工作原理

FIELD OFAPPLICATION运用领域

图 鸟 母 D航空 船舶 军工 消费电子 汽车 家电Aerospace Ship Military Consumer Automobile Home AppliancesElectronics

Utilize pneumatically/hydraulically combined booster and braking system to prevent multiple impact.

THEAPPLICATION OF SHOCKTEST冲击试验作用

冲击试验用于精确测量产品脆值以及评估产品包装的保护能力，无论您是否希望进行完整的产品破损边界评估、工业标准的冲击脉冲或者公司自己订立的条件，我们都可以提供最先进的冲击试验系统来满足您的应用要求。

适用于航空、航天、船舶、军工、消费电子、汽车、家电及显示设备等领域的抗冲击试验。

通过选择不同的波形发生器，可执行：半正弦波；后峰锯齿波；梯形波。

Shock test is used to accurately measure the product fragility and evaluate the protective ability of product packaging.To do a boundaryassessmenton complete productbreakage,industrial standard shock pulse or company's internal standards,we can provide the mostadvanced shock test system to meet yourapplication requirements.

It is suitable for shock test in the fields of aviation,aerospace,shipbuilding,military industry,consumer electronics,automobiles,home appliances and display equipment.

Byselectingdifferentwaveform generators,itcan perform half sinusoidal wave,sawtooth wave,or trapezoidal wave.

SPECIFICATIONS技术参数

HIGHACCELERATIONSHOCKTESTSYSTEM高加速度冲击试验机

主要应用于：手机、计算机部件、光学部件、连接器等，还可以作为缓冲材料实验机测试缓冲材料的性能。

Mainapplicatisobileoesomputerompoetsticalompoetsectors,tlsoedtoestto bance ability of materials.

SPECIFICATIONS

AUXILIARYDEVICE

辅助装置 (组件)

DUALMASSSHOCKAMPLIFIER(DMSA)

WAVEFORMGENERATOR波形发生器

安全装置

1、用于危险区域地面保护的装置，通过检测到足够的压力而产生一个开关信号，实现区域安全保护。

A device used for ground protection in hazardous areas,which generates a switch signal by detecting the pressure of the trip to achieve area safety protection.

安全踏垫保护SafetyProtectionMats

2、当人体误入危险区域时，通过受光器和发光器自动检测到，并暂停工作，从而保护人安全。

Whenthe humanbodystrays into the dangerousarea,the light receiver and luminizer will automatically detect and stop the equipment to protect humansafety.

光栅保护Grating Protection

INSTALLATIONREFERENCEDRAWING安装参考图

INCLINEDIMPACTTEST MACHINE

斜面冲击试验机

斜面冲击试验机主要用于模拟产品包装在实际运输过程中抗冲击损坏的能力。如：搬运、装卸，火车更换车厢时的冲击以及在运输过程中紧急制动造成的冲击等。倾斜冲击试验机符合行业标准的包装测试规范，如ASTM，ISTA，ISO，和MIL-STD。

Inclinedimpacttesterismainlyusedtosimulate theimpactanddamageresistanceofproductpackaging inarealenvironment, suchashandlingloadingandunloading,mpactduringshiftingfromonecabintonotherndimpactresultedfromemergency brakeduringtansportIindocktesteratisfsidustrialandardsforpackaginguchsIAIOd.

SPECIFICATIONS技术参数

BUMP/SHOCK TESTMACHINE

碰撞试验机

本产品适用于元器件、设备和其他电子电工产品在运输或使用期间可能遭受到重复冲击。碰撞试验也可以作为确定样品在结构方面的满意设计的一种方法，或作为质量控制的手段。碰撞试验基本在于样品在碰撞试验机上经受具有规定的峰值加速度和持续时间的标准脉冲的重复冲击。

Componentsandotherelectronicand electricalproducts mayexperience repeating impactduring transportationoruse.Bump testcanbeusedasamethodtoensure thesatisfactionofdesignstructureorasaqualityasurancemethod.Specimenwilexperience regular peak acceleration and continuous impact with standard pulse during the bump test.

FIELDOFAPPLICATION运用领域

鸟 ? □ D
航空 船舶 军工 消费电子 汽车 家电
Aerospace Ship Military Consumer Automobile Home AppliancesElectronics

SPECIFICATIONS技术参数

SHOCK/DROP

MEASUREMENTSYSTEMS

冲击/跌落测量系统

冲击测量分析仪是一种专用的冲击波形捕捉和分析平台，适用于一般冲击和高冲击环境下的冲击事件捕捉、测量和分析。它能够满足ISO、GJB150、GJB360、GB2423、MIL-STD-810等冲击测试标准，是冲击环境试验和测量分析的专业工具。

Shock measurementanalyzeris speciallyusedasaplatformtocaptureandanalyzeshockwave.Itissuitableforcapturing,measurementandanalysisoftheeventsundernormalorhighimpacts.ItcanmeetISO,GJB150,GB360,GB2423,M-STD-80and othershock test standardsand isaprofessional toolfor environmentalshock testing,measurementand analysis.

SPECIFICATIONS

DROPTESTERFOR HEAVYPACKAGE

零高度跌落试验机

对于大型包装货物，一般质量较大，在运输、搬运时垂直跌落高度较低。要求跌落试验高度也相对较低，零高度跌落试验机主要用于较大型包装件跌落测试。零高度跌落试验机由一个可以快速向下移动的E型叉架作为托架，被测物件按试验要求（面、棱、角试验）放置平衡。试验时，托架先于试件高速向下运动，加速度 { > } 3 6 . 保证托架与试件清楚分离，实现自由跌落。标准跌落高度范围2.54cm—120cm。

For large packaging with high mass,the vertical drop height during transport will be low and therefore they need drop testwith relativelylowdrop height.Zero Height Drop Tester ismainly used fordrop test of big package.It uses an E-shaped fork as a bracket that can move downward quickly and the specimen is placed in balance according to test requirement (surface,edge orcornerdrop test).During testing,the bracketmovesdownwards quicklyahead of specimenwith acceleration greater than 3G to ensure the separation of bracketand specimenand achieve free fall.Thestandard fall distance is ranged between 2 . 5 4 0cm - 1 2 0cm

SPECIFICATIONS技术参数

DROPTESTMACHINE

包装跌落试验机

包装跌落试验用于测试包装件在使用和运输、装卸过程中受到跌落冲击的影响程度，LABTONE ^ { \prime \prime } 1 6 + ^ { \prime \prime } 设计严格保证了其精确性。除了精确的平面跌落试验外，也可以进行棱跌落和角跌落试验，以便对包装/产品进行完整的性能评估。

Packagingdroptestisusedtodeterminetheeffectofimpactonthepackageduringuse,transportation,loadingandunloading The strictly designed LABTONE " 1 \mathsf { G } + \prime \prime ensures itsaccuracy.Apart from accurate plane falltest,it can also perform edge drop and corner drop test to make a complete evaluation on the performance of packaging and product.

WORKINGPROCESS工作流程

SPECIFICATIONS技术参数

DROPTESTERFOR PORTABLEGADGETS

便携式产品跌落试验机

DT系列专为智能手机移动电话以及其他小件物品提供跌落冲击测试，使产品按要求的姿态(不翻转)跌落有效地提供了跌落测试的再现性。

DTseriesprovidesdropimpacttestforsmartphones,cellphonesandothermobile gadgets.Thespecimenholdingsystemcan manipulate the dropping posture,and provide effective reproducibility of drop tests.

FEATHRES

特点

01 笔式气缸夹持产品一起按要求姿态跌落，到 末端气缸打开，防止重心偏移及空气对产品的 跌姿态的干扰； Keep the dropping posture by clamping of products with pneumatic pen cylinder to avoid the disturbance of posture by the gravity shift or atmospheric friction.The cylinder will be released near the end of dropping stroke.

02 跌落高度可自由调节设定； The drop height can be settled flexibly.

03 安全设计-吸合式电磁铁不会意外释放试件除非被激活。

Safetydesign-theelectromagnetic holder never releases the specimen holding system unless it' senergized.

SPECIFICATIONS

RELEASE HOOKS

KDT2000释放抓钩

概述：跌落试验装置主要模拟包装件在运输搬运过程中的跌落或冲击。它特别适合在不规则条件下，做大型样品的冲击载荷测试。不管包装的尺寸或形状，本系统都能够执行各种自由跌落(平面，角或边)。使用时，通过测试包装件上绑带勾_上提升环;将提升环装进释放机构钳口，然后通过提升设备将释放机构和测试包装件提升至试验跌落高度。脚式释放开关通过激活释放机构中的电磁阀，使释放机构钳口打开，使包装自由跌落。放机构中的电磁阀，使释放机构钳口打开，使包装自由跌落.

The KDT2oo0 Drop Tester is designed to simulate the drops and mechanical hazards that occur in distribution.It is especially suited tovery large,heavy payloads which cannot be tested on conventional drop test machines. Regardless of the size or shape of the package, the system is capable of performing a variety of free fall (flat, corner oredge).When used, lift the ring by lifting it onto the release mechanism jaw and then lifting the release mechanism and the test package up to the test drop height by lifting the device.The foot release switch activates the solenoid valve in the release mechanism so that the release mechanism jaws open and the package is free to fall.

SPECIFICATIONS