该页无缩略图
TC骨架油封
TCSKELETONOILSEAL
产品特点：TC骨架油封是工业常用的旋转轴密封配件，采用双唇口内置弹簧结构，内置金属骨架、外部全包橡胶，整体结构扎实稳固不易变形。主密封唇紧密贴合转轴，有效防止内部油脂渗漏，副防尘唇可阻挡外界灰尘、泥沙、水汽进入设备内部。内置自紧弹簧能持续抱紧轴体，自动补偿唇口磨损与转轴轻微偏心跳动，密封效果持久稳定。它耐油耐磨、抗老化性好，适配中低压、中等转速工作环境，安装简单、拆装便捷、使用寿命长，广泛用于电机、减速机、水泵、农机、汽车及各类工程机械转轴位置。
产品材质：丁腈(NBR)、氟胶(FKM)、硅胶(VMQ)、全氟醚(FFKM)、三元乙丙(EPDM)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C } VMQ: - 5 0 ^ { \circ } ( ~ + 3 0 0 ^ { \circ } C FFKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 3 0 0 ^ { \circ } \mathsf { C } EPDM: - 5 0 ^ { \circ } C ~ + 1 5 0 ^ { \circ } C 适配介质：机油、齿轮油、液压油、润滑油等各类油性介质。
Product Features:The TC frame oil seal isa commonlyused sealingcomponentforrotating shafts in industrial applications.It features a double lipstructurewith built-in springs,ametal frame insideandanall-rubberouter layer.The overall structureis solidand stable,and doesnotdeform easily.Themain sealing lipcloselyadheresto the rotatingshaft,effectivelypreventing internal oil leakage.The auxiliary dust-proof lip can prevent external dust,sand,watervaporfrom entering the equipment.The built-in self-tightening spring can continuously hold the shaft in place,automatically compensating forlipwearand slightvibration of the rotating shaft,ensuringa long-lasting and stable sealing effect.It is oil-resistant,wear-resistant, and has good anti-agingproperties.Itis suitable formedium-low pressure and medium-speed working environments.The installationis simple,disassembly isconvenient,and the service lifeislong.Itiswidely used inmotor,reducer,waterpump,agricultural machinery,automobiles,and variousconstruction machineryrotatingshaftpositions.
ProductMaterials:NBR,FKM,VQ, FFKM, NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } ~ + 2 8 0 ^ { \circ } { C } VMQ: - 5 0 ^ { \circ } { C } ~ + 3 0 0 ^ { \circ } { C } （204号 FFKM: - 2 0 ^ { \circ } { C } ~ + 3 0 0 ^ { \circ } { C } EPDM: - 5 0 ^ { \circ } { C } { ~ } + 1 5 0 ^ { \circ } { C }
Applicable Media:Engineoil,gearoil,hydraulic oil,lubricatingoil,and other oil-based media.
Outer layer外层 Bottom（Air）底面（空气）
弹簧
Skeleton oil-sealed spring Metalskeleton金属骨架
弹簧保持的唇口Thelip|maintainedby thespring
弹簧沟槽Springgroove Diaphragm隔膜
密封唇Sealing lip Oilsealdust-prooflip防尘唇
唇边the edge of the lips Skeletonoil seal spring plane弹簧平面 Rightside右侧_空气侧Air side
SC骨架油封
SCSKELETONOILSEAL
产品特点：SC骨架油封是单唇口外包橡胶内骨架结构的旋转轴密封件，自带自紧螺旋弹簧，无防尘副唇，专为干燥洁净、少粉尘的良好工况环境设计。金属骨架与橡胶紧密硫化融为一体，整体刚性充足，安装后定位精准稳固，可有效防止使用过程中出现偏移偏磨现象；单道主密封唇依靠内置弹簧持续紧贴转轴表面，能够高效阻隔机油、齿轮油、液压油等各类润滑油性介质向外渗漏，还可自动补偿密封唇日常磨损以及转轴运转产生的轻微跳动量。产品整体耐油耐磨、抗老化性能优良，外缘密封严实不漏油，它整体造型小巧紧凑、结构简约，生产成本低、性价比高，安装拆卸都十分便捷不占用过多安装空间，广泛适配各类室内清洁工况设备，常见应用于各类中小型电机、减速机、齿轮箱、清水泵、空压机、电动工具、精密机床配件以及轻型家用工业机械的旋转轴密封位置。
产品材质：丁睛(NBR)、氟胶(FKM)、
硅胶(VMQ)、全氟醚(FFKM)、三元乙丙
(EPDM)耐温范围：NBR： - 3 0 ^ { \circ } \mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C } FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C } VMQ: - 5 0 ^ { \circ } ( ~ + 3 0 0 ^ { \circ } C FFKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 3 0 0 ^ { \circ } \mathsf { C } EPDM: - 5 0 ^ { \circ } C ~ + 1 5 0 ^ { \circ } C
Product features:The SC frame oil seal isa rotating shaft sealing componentwitha single lip outerlayer and an inner rubber skeleton structure. It comes with a self-tightening spiral spring and no dust-proof secondary lip.It is specifically designed for dry,clean,and low-dust working environments. Themetal skeletoniscloselyvulcanized with the rubber to forma whole with sufficient overallrigidity. After installation,it is precisely and stably positioned, effectively preventing offset and wear during use. Thesingle main sealinglip relieson the built-in springto continuouslyadhere tothe surfaceof the rotating shaft,efficiently blocking the leakage of various lubricatingmedia such as engine oil, gearoil,and hydraulicoil.It canalso automatically compensateforthedailywearof thesealinglip and the slight vibrationcaused by the rotation of the shaft.The overall performance of theproduct is excellent in oil resistance,wear resistance,and anti-aging.The outer edge is tightly sealed without oil leakage.Its overall shape is compact and simple, with low production cost and high cost performance. Installation and disassembly are very convenient, and it does not occupy much installation space. It is widely applicable to various indoor cleaning working equipment, commonly used in various small and medium-sized motors,reducers,gearboxes, waterpumps,aircompressors,powertools,precision machine parts,and lightweighthousehold industrial machinery,for sealing the rotating shaft positions.
Product materials:NBR,FKM,VMQ, FFKM,E
NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } { ~ } + 2 8 0 ^ { \circ } { C } VMQ: - 5 0 ^ { \circ } { C } { ~ } { + 3 0 0 ^ { \circ } { C } } FFKM: - 2 0 ^ { \circ } { C } ~ + 3 0 0 ^ { \circ } { C } EPDM: - 5 0 ^ { \circ } { C } { ~ } + 1 5 0 ^ { \circ } { C }
Q
Co
TG4骨架油封
TG4SKELETONOILSEAL
产品特点：TG4骨架油封是工业常用的旋转轴密封配件，采用双唇口内置弹簧结构，内置金属骨架、外部全包橡胶，外圆带有螺纹设计，整体结构扎实稳固不易变形。主密封唇紧密贴合转轴，有效防止内部油脂渗漏，副防尘唇可阻挡外界灰尘、泥沙、水汽进入设备内部。内置自紧弹簧能持续抱紧轴体，自动补偿唇口磨损与转轴轻微偏心跳动，密封效果持久稳定；外圆螺纹可增强与安装孔的贴合密封性，进一步提升防渗漏性能，同时便于安装时定位，防止安装偏移。它耐油耐磨、抗老化性好，适配中低压、中等转速工作环境，安装简单、拆装便捷、使用寿命长，广泛用于电机、减速机、水泵、农机、汽车及各类工程机械转轴位置。
适配介质：机油、齿轮油、液压油、润滑油等各类油性介质。
产品材质：丁晴(NBR)、氟胶(FKM)、耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
Product features:TG4 shaft seal is a commonly used sealing component for rotating shafts in industrial applications.It features a double lip structure with built-in springs,a metal framework inside,and anall-rubberouterlayer.Theouter circlehasa threaded design,makingthe overall structure sturdyand stable without deformation. The main sealing lip closely adheres to the rotating shaft,effectively preventing internal oil leakage. The auxiliary dust-proof lip can prevent external dust,sand,and moisture from entering the equipment. The built-in self-tightening spring can continuously hold the shaft in place,automatically compensating for wear on the lip and slight vibrations of the rotating shaft,ensuringa long-lasting and stable sealing effect.The outercircle threads enhance the sealing performance with the installation hole, further improving the anti-leakage performance, and also facilitate positioning during installation to prevent installation offset.It is oil-resistant, wear-resistant,and has good anti-agingproperties. It is suitable for medium and low pressure,medium-speed working environments.Installation is simple, disassembly and assembly are convenient,and the service life is long.It is widely used in motor, reducer,water pump,agricultural machinery, automobiles,and various construction machinery rotating shaft positions.
Compatible media:Engine oil,gearoil, hydraulic oil,lubricatingoil,etc.,various oil-based media.
Product materials: (NBR),(FKM)
NBR: - 3 0 ^ { \circ } { C } \mathord { ~ } + 1 0 0 ^ { \circ } { C } （204号
FKM: - 2 0 ^ { \circ } { C } ~ + 2 8 0 ^ { \circ } { C }
eo
UN内骨架油封
UNINNERSKELETONOILSEAL
产品特点：UN内骨架油封是专为中高压往复运动工况打造的高性能密封件，内置金属内骨架可在高压、冲击载荷下为密封件提供稳定支撑，避免使用中出现变形、扭曲问题；搭配对称唇口设计实现孔轴通用，无需区分安装方向，大幅降低装配失误率。产品回弹性能优异，长期使用仍能保持唇口与接触面的紧密贴合，适配宽温域工作环境，可承受高工作压力。
应用范围：广泛应用于各类液压油缸、气缸、工程机械、矿山设备、农业机械、注塑设备、数控机床、起重机械、汽车液压系统、冶金设备、石油机械等领域，为各类往复运动部件提供可靠的密封保障，有效防止介质泄漏，外界杂质侵入，保障设备长期稳定运行，延长系统使用寿命。
产品材质：丁睛(NBR)、氟胶(FKM)、硅胶(VMQ)、丙烯酸酯(ACM)
耐温范围： NBR: - 3 0 ^ { \circ } \mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C } FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C } VMQ: - 5 0 ^ { \circ } ( ~ + 3 0 0 ^ { \circ } C
ProductFeatures:TheUNinternal skeleton oil seal isahigh-performance sealing component specifically designed formediumand high-pressure reciprocatingmotion conditions.The built-inmetal inner skeleton provides stable support for the sealing component under high pressure and impact loads, preventing deformation and distortion during use. The symmetrical lip design enables universal application forholes and shafts,eliminating the need to distinguish installation directions,significantly reducingassemblyerrorrates.The product has excellent rebound performance,maintaining the closefitbetweenthelipandthecontactsurface evenafter long-termuse,suitable forawide temperature range working environment,and capable of withstanding high working pressure.
ApplicationScope:Widelyused in various hydraulic cylinders,aircylinders,construction machinery,mining equipment,agricultural machinery, injection molding equipment, CNC machines, lifting machinery,automotive hydraulic systems, metallurgical equipment, petroleum machinery, and other fields,providing reliable sealing protection for various reciprocating motion components, effectively preventingmedium leakage and foreign matterintrusion,ensuring the long-term stable operation of equipment,and extending the service life of the system.
Productaterials:NBR,FKM,VQ,
Temperature Range: NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } ~ + 2 8 0 ^ { \circ } { C } （204号 VMQ: - 5 0 ^ { \circ } { C } ~ + 3 0 0 ^ { \circ } { C } ACM: - 3 0 ^ { \circ } { C } { ~ } { + 1 5 0 ^ { \circ } { C } }
Co9
K型自紧油封
K-TYPESELF-TIGHTENINGOILSEAL
产品特点：K型自紧油封是专为各类旋转轴工况打造的高性能密封件，自带预紧力的唇口结构可随轴的偏心、径向跳动自动补偿贴合，对安装误差和设备运行偏移的容忍度高，始终保持密封面紧密接触；整体式紧凑结构安装便捷，无需特殊工装即可完成装配，大幅降低装配失误率。它的特殊唇口轮廓设计能减少运行磨损，同时实现内部介质防泄漏、外部杂质防侵入的双重防护，长期运行也能维持可靠的密封性能。
应用范围：广泛应用于通用机械、工程机械、汽车车桥、矿山冶金设备、农业机械、工业机床、化工泵等领域，为各类旋转轴设备提供稳定长效的密封保障，有效延长设备使用寿命。
产品材质：丁腈(NBR)、氟胶(FKM)、三元乙丙(EPDM)、全氟醚(FFKM)
耐温范围： NBR: - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C } EPDM: - 5 0 ^ { \circ } C ~ + 1 5 0 ^ { \circ } C FFKM: - 1 0 ^ { \circ } C ~ + 2 8 8 ^ { \circ } C
Product features:The K-type self-tightening oil seal is a high-performance sealing component specifically designed forvarious rotatingshaft applications.The lip structurewith built-in preload can automatically compensate for the eccentricity and radial runoutof the shaft,providing high tolerance for installation errors and equipment operation deviations,and always maintaininga tight contact between the sealing surfaces.The integrated compact structure makes installation convenient,and it can be assembled without special tools,significantly reducing the error rate during assembly.Its special lip contour design can reduce operating wear, while achieving dual protection of preventing internal mediumleakageand externalimpurities from invading.Itcanmaintainreliable sealingperformance even during long-term operation.
Applicationscope:Widelyused ingeneral machinery,constructionmachinery,automotive axles,miningand metallurgical equipment,agricultural machinery,industrial machines,chemical pumps, and other fields,providing stable and long-lasting sealing protection for various rotating shaft equipment, effectively extending the service life of the equipment.
Productmaterials:BR,K,EM,
Temperature resistance range:
NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } （204号
FKM: - 2 0 ^ { \circ } { C } ~ + 2 8 0 ^ { \circ } { C }
EPDM: - 5 0 ^ { \circ } { C } { ~ } { + 1 5 0 ^ { \circ } } { C }
FFKM: - 1 0 ^ { \circ } { C } ~ + 2 8 8 ^ { \circ } { C }
C
EC端盖密封
ECENDCOVERSEAL
产品特点：EC端盖密封是专为电机、减速机等设备端盖打造的高性能密封组件，采用与端盖精准适配的一体化结构，无需额外加工即可直接嵌入安装，大幅降低装配误差、提升装配效率；部分型号自带储脂润滑结构，可为唇口持续提供润滑，减少运行摩擦损耗，延长使用寿命。它采用多重密封防护设计，既能有效防止内部润滑油泄漏，又能阻挡外部粉尘、水汽与杂质侵入，同时对轴的径向跳动、安装偏心及设备运行振动具备良好的适应性，可在复杂工况下维持稳定密封性能。
应用范围：广泛应用于各类工业电机、减速机、齿轮箱、水泵、风机、工程机械、矿山冶金设备、农业机械、起重输送设备、数控机床、化工泵等领域，为设备轴承与传动部件提供长效可靠的密封防护，保障设备稳定运行，降低维护成本。
产品材质：丁腈(NBR)、氟胶(FKM)、全氟醚(FFKM)耐温范围：NBR: - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C } FFKM: 2 0 ^ { \circ } \mathsf { C } ~ + 2 5 0 ^ { \circ } \mathsf { C }
Productfeatures:TheEC endcoverseal isa high-performancesealingcomponentspecially designed for the end covers of motors,reducers, and other equipment.It adopts an integrated structure that precisely fits the end cover,allowing for direct insertion and installation without additional processing, significantly reducing assembly errors and improving assembly efficiency.Some models come with a grease storage lubrication structure,which can continuously provide lubrication to the lip seal, reducing running friction loss and extending service life.It features multiple sealing protection designs, efectively preventing internal lubricatingoil leakage, blocking external dust,water vapor,and impurities from entering,and having good adaptability to the radial runout of the shaft,installation eccentricity, and equipment operating vibration,maintaining stable sealing performance in complex working conditions.
Application scope:Widelyused in various industrial motors,reducers,gearboxes,pumps, fans,construction machinery,mining and metallurgical equipment,agricultural machinery,lifting and conveying equipment, CNC machines,chemical pumps,and other fields.It provides long-term and reliable sealing protection for equipment bearings and transmission components,ensuring stable operation of the equipment and reducing maintenance costs.
Productmaterials:NBR,FKM,FK
开口油封
OPENOIL SEAL
产品特点：开口油封采用可伸展式开口结构，无需拆解设备轴端即可轻松完成安装，适配性强，大幅降低了装配难度与设备停机成本；内置弹性支撑设计，回弹性优异不易折断，可为密封唇口提供持续稳定的预紧力，始终保持与轴面的紧密贴合；外壁采用特殊螺纹结构，能牢牢贴合安装面，实现更可靠的密封效果；同时适配耐高温、高转速工况，长期运行下仍能维持稳定的密封性能，有效防止介质泄漏与外界杂质侵入，为各类旋转轴设备提供长效防护。
应用范围：可为汽车变速箱轴、通用减速机、农业机械驱动桥、船舶主机轴、工业机器人关节、液压油缸活塞杆等各类设备提供可靠密封防护，
产品材质：丁腈(NBR)、氟胶(FKM)、聚氨酯(PU)耐温范围：NBR: - 3 0 ^ { \circ } \mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C } FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C } PU: - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C }
Product features:The openoil seal adoptsa stretchable opening structure,allowing for easy installationwithout theneed todisassemble the equipment shaft end.Ithas strong adaptability and significantlyreduces theassemblydifficulty and equipment downtime costs.The built-in elastic support design has excellent resilience and is not prone to breaking,providing continuous and stable preload to the sealing lip,ensuringaconstant tight fit with the shaft surface.The outer wall features aspecial thread structure thatcan firmlyadhere to the installation surface,achievingamorereliable sealing effect.Atthesame time,itiscompatible with high-temperature and high-speed operating conditions,maintaining stable sealingperformance over long-term operation,effectivelypreventing medium leakage and the intrusion of external impurities,providing long-term protection for various rotating shaft equipment.
Application scope:It can provide reliable sealing protection for various equipment such as automotive transmission shafts,general reducers,agricultural machinery drive axles,ship main shafts,industrial robot joints,hydraulic cylinder piston rods,etc.
Productmaterials:NBR,FKM,PU
Temperature resistance range:
四氟铁壳油封
PTFESHELLOILSEAL
产品特点：四氟铁壳油封是专为高转速、强腐蚀等苛刻工况打造的高性能密封件，金属外壳为其提供稳定的刚性支撑，安装时通过过盈配合牢牢固定，抗变形、抗移位能力强，适配多种安装场景；密封唇口摩擦系数极低，运行阻力小、磨损轻微，可长期适配高速旋转轴工况。同时它具备优异的耐化学腐蚀性能，能耐受酸碱、强溶剂等多种苛刻介质，且耐高低温、抗老化性能突出，宽温域工况下也能保持可靠密封效果，长期使用不易脆化失效，为设备提供长效的防泄漏、防杂质侵入防护。
应用范围：适用于化工泵、食品医药设备、高转速电机、真空泵、减速机、冶金设备、航空航天及高低温工业设备，可应对强腐蚀、高低温、高转速工况。
适配介质：可耐受各类强酸、强碱及腐蚀性溶液，兼容绝大多数有机溶剂、矿物油、液压油、润滑油等油品介质，也适配水、蒸汽、腐蚀性气体及食品医药级流体，仅不适配熔融碱金属、三氟化氯等极少数强腐蚀性介质。
ProductFeatures:ThePTFE ironshelloil seal isa high-performance sealing component specifically designed for demanding conditions such as high rotational speed and strong corrosion.The metal casing provides stable rigid support,and during installation,itis firmly fixed through interference fit.It has strong resistance to deformation and displacement,and is suitable for various installation scenarios.The friction coefficient of the sealing lip is extremely low,resulting in low operating resistance and slightwear.Itcan beadapted to high-speed rotating shaft conditions for a long time.At the same time,it has excellent chemical corrosion resistance,capable of withstanding various harsh media such as acids,alkalis,and strong solvents It also has outstanding resistance to temperature extremes,anti-aging properties,and can maintain reliable sealingperformance in awide temperature range.It is not prone to brittle failure and provides long-term protection against leakage and impurity intrusion for the equipment.
Application Scope: Suitable for chemical pumps, food and pharmaceutical equipment, high-speed motors,vacuum pumps,reducers,metallurgical equipment,aerospace and high-temperature industrial equipment,capable of coping with strong corrosion, high-temperature,and high-speed conditions.
Compatible Media: Can withstand various strong acids,strong alkalis,and corrosive solutions. Compatible with most organic solvents,mineral oils,hydraulic oils,lubricatingoils,and also suitable for water,steam,corrosive gases,and food and pharmaceutical fluids.Not suitable for extremely few strong corrosive media such as molten alkali metalsand trifluorochlorine.
1O
无骨采细 无骨架油封 G8
J型夹布油封
J-TYPEFABRIC-REINFORCEDOILSEAL
产品特点：J型夹布油封是专为工业设备轴端打造的高性能密封部件，具备耐磨耐压、抗挤出性强、摩擦运行稳定、防尘防漏效果优异、耐冲击振动等核心优势，能为设备提供长效可靠的密封防护。
为适配不同工况需求，产品形成了清晰的型号体系：R35作为通用基础款，拆装便捷、密封持久，适配常规轧机、减速机轴头等润滑良好的通用工况；带导油槽设计的R37款，可引导润滑油回流、减少干磨损耗，专为高速轧机、精密齿轮箱等高速高润滑场景打造；R36为定制过渡款，结构灵活可调，可适配非标准设备的各类定制化工况；R58强化密封款则针对重载、多尘、高污染的恶劣环境设计，防护性能更强。
应用范围：广泛应用于工程机械、建筑机械、冶金设备、轨道交通、船舶制造、农业机械等多个行业，无论是常规通用场景还是特殊非标工况，都能为设备筑牢密封防线，助力长效稳定运行。
产品材质：丁晴(NBR) ^ + 织物、氟胶（FKM） ^ { + } 织物
ProductFeatures:TheJ-shapedcloth-covered oil seal is a high-performance sealing component specificallydesigned forthe shaft endsof industrial equipment.It boasts core advantages such as wear resistance,high pressure tolerance,strong resistance toextrusion,stablefriction operation,excellent dustandleakagepreventionperformance,and resistance to impact and vibration.It can provide long-lastingand reliable sealingprotection for the equipment.
To meet different operational requirements, theproducthasaclearmodel system:R35isthe general basic model,whichis easyto disassemble andassembleand hasa long-lastingseal.Itissuitable forcommonrollingmills,reducershaftheads, andothergeneralworkingconditionswith good lubrication; theR37 model with a guide oil groove design can guide the return oflubricating oil and reduce drywear,and is specifically designed for high-speed rollingmillsand precision gearboxes in high-speed and high-lubrication scenarios;the R36isacustomized transitional model,with flexible and adjustable structure,suitable for various customized working conditions of non-standard equipment; the R58 reinforced seal model is designed for harsh environments with heavy loads,dust,and high pollution, providing stronger protection performance.
ApplicationScope:Widelyused invarious industries such as construction machinery,construction equipment,metallurgical equipment,rail transportation, shipbuilding,agriculturalmachinery,etc.Itcan builda sealing defense line for equipment in both common general scenarios and special non-standard working conditions,helping to ensure long-term stable operation.
Product Materials:Nitrile (NBR) ^ + fabric, FKM ^ + fabric Temperature Range: NBR ^ + fabric: \boldsymbol { - 3 0 ^ { \circ } C } to + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } to + 2 8 0 ^ { \circ } { C }
J型无骨架油封
J-TYPENOSKELETONOILSEAL
产品特点：J型无骨架油封是工业领域经典的基础型密封件，专为低压工况的防尘与密封需求打造。它采用标志性的“J”形截面单唇结构，腰部增设加强筋，有效提升油封自身的结构稳定性，保障密封唇在工作中不易变形偏移。产品核心定位为“防尘 ^ + 低压密封”，防尘效果优异，能有效阻挡外界粉尘、杂质侵入设备内部；同时安装方式灵活便捷，支持切口安装，完美解决了部分大型或集成设备无法从轴端直接套装油封的装配难题，大幅降低安装门槛。不过它也存在一定局限性，耐压差性能有限，在高速运转工况下易出现密封唇磨损失效的情况，更适合常规中低速低压场景使用。它可适配多元工况，既能满足液压缸防尘、小型农机、机床活塞杆密封等常规工业场景需求，也能适配高温设备防尘、化工机械低压密封等特殊恶劣工况，为不同低压密封场景提供可靠的防护方案。
产品材质：丁腈(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } \mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C }
FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
Product Features:The J-shaped non-rigid oil seal isa classic basic sealing component in the industrial field,specificallydesigned fordust prevention and sealing requirements in low-pressure conditions. It adopts the distinctive "J" shape single-lip structure, with additional strengthening ribs added atthe waist, effectively enhancing the structural stability of the oil seal and preventing the sealing lip from deforming or shifting during operation.The core positioning of this product is "dust prevention+low-pressure sealing".It has excellent dust prevention performance and can effectively prevent external dust and impurities from entering the equipment interior.At the same time,the installation method is flexible and convenient, supporting cut-edge installation,which perfectly solves the assembly problem for some large or integrated equipment that cannot be directly installed with the oil seal from the shaft end,significantly reducing the installation threshold.However,it also has certain limitations.The pressure difference resistance performance is limited,and in high-speed operation conditions,it is prone to failure due to the wear and loss of the sealing lip.It is more suitable for conventional low-speed and low-pressure scenarios. It canadapt to variousworking conditions and can meet the needs of common industrial scenarios suchas hydraulic cylinder dust prevention,small agricultural machinery,and machine tool piston rod sealing,aswell as special harsh working conditions such as high-temperature equipment dust prevention and chemical machinery low-pressure sealing, providingreliable protection solutions for different low-pressure sealing scenarios.
ProductMaterials:(NBR),(FKM) Temperature Resistance Range:
U型无骨架油封
U-TYPENOSKELETONOILSEAL
产品特点：U型无骨架油封是一款压力适配能力出色的通用型密封件，采用标志性的U形截面，搭配单唇或双唇对称结构，唇口角度可按工作压力分级优化 ( 3 0 ^ { \circ } \ ~ 4 5 ^ { \circ } ），无金属支撑的轻量化设计让安装更便捷灵活；它回弹性优异，能很好地适应不规则轴面，通过差异化的唇口角度设计，可从容覆盖从低压到中压的各类工况，低压款大角度唇口适配常规场景，高压款小角度唇口优化受力，密封稳定可靠；不过它在高压工况下易出现唇口翻滚问题，需配套支承环使用，目前广泛应用于中低压液压油缸、各类气动元件及表面粗糙度较大的轴类密封场景，为工业设备提供稳定长效的密封防护。
产品材质：丁睛(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } \mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C } FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
ProductFeatures:TheU-shapedframelessoil sealis a versatile sealing component with excellent pressure adaptation capability.It featuresa distinctive U-shaped cross-section,combined with a single-lip ordouble-lip symmetrical structure.The lip angle can be optimized according to the working pressure （204号 ( 3 0 ^ { \circ } ~ 4 5 ^ { \circ } ) ).The lightweight design without metal supports makes installation more convenient and flexible.It has excellent resilience and can well adapt to irregularshaft surfaces.Through the differentiated lipangle design,itcancomfortably cover various working conditions from low pressure tomedium pressure.Thelow-pressuremodelwith a large-angle lip is suitable for common scenarios, whilethehigh-pressuremodelwitha small-angle lip optimizes the force distribution,ensuring stable and reliable sealing.However, it is prone to lip rolling problems under high-pressure conditions and requires a supporting ring foruse.Currently, it iswidelyapplied inmediumand low-pressure hydraulic cylinders,various pneumatic components, and shaft sealing scenarios with rough surfaces, providing stable and long-lasting sealing protection for industrial equipment.
ProductMaterials:(NBR),(FKM)
Temperature Range:
NBR: \boldsymbol { - 3 0 ^ { \circ } C } to + 1 0 0 ^ { \circ } { C }
FKM: \boldsymbol { - 2 0 ^ { \circ } C } to + 2 8 0 ^ { \circ } { C } （204号
品
Y型无骨架油封
Y-TYPENOSKELETONOILSEAL
产品特点：Y型无骨架油封是专为高压工况打造的高性能密封件，截面呈标志性"Y”形，采用双唇张开式结构，工作唇与非工作唇不等高，结构对称度高。它是同类型油封中耐压性能最强的型号，极限耐压可达32MPa，特殊的双唇张开式结构能让压力直接作用于唇口，实现“压力越高密封越紧”的效果，耐压强、使用寿命长，且无唇口翻滚风险；仅结构相对复杂，成本略高。这类油封主要适配高压主油缸、重型机械（如挖掘机大臂油缸），以及各类高压重载的工业设备密封场景，为恶劣工况提供稳定可靠的高压防护。
产品材质：丁晴(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C } FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
Product Features:TheY-shaped non-rigid oil seal isahigh-performance sealing component specificallydesigned for high-pressureapplications. Itscross-sectionischaracterized by the distinctive "Y" shape,featuring a double-lip open structure. The working lip and non-working lip are not of the same height,and the structural symmetry is high.It is the most pressure-resistant model among similaroil seals,withamaximum pressure resistance ofup to 3 2 { M P a } .The special double-lip open structure enables the pressure to directly act on the lip, achieving the effect of "the higher the pressure, the tighter the seal",featuring strong pressure resistance, long service life,and no risk of lip rolling.The structure is relatively complex and the cost is slightly higher. These oil sealsare mainly suitable for high-pressure main oil cylinders,heavy machinery (such as excavator boomoil cylinders),and various industrial equipment with high-pressure and heavy loads sealing scenarios, providing stable and reliable high-pressure protection in harsh conditions.
ProductMaterials:NBR,FKM Temperature Resistance Range: NBR: - 3 0 ^ { \circ } { C } { ~ } + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } { ~ } + 2 8 0 ^ { \circ } { C }
Z型无骨架油封
Z-TYPENOSKELETONOILSEAL
产品特点：Z型无骨架油封采用独特的 " 2 " 形截面设计，整体结构紧凑轻薄，可按需采用单唇或双唇结构，表面光泽度高；其核心优势在于优异的高速适配性能，可适配线速度大于6 m / s 的旋转场景，紧凑的结构大幅降低了高速旋转时的摩擦发热，搭配回弹性能优异的唇口，既能稳定实现密封防尘效果，又能大幅减少空间占用，适配各类对安装空间有限制的设备；不过该油封耐压性能一般，对安装精度要求较高，目前已广泛应用于高速电机轴、精密机床主轴防尘、精密设备旋转部位密封等场景，尤其适配对高速运转、低摩擦特性有要求的工况。
产品材质：丁腈(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } mathsf C ~ + 1 0 0 ^ { \circ } \mathsf C FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
Product Features:The Z-shaped non-rigid oil seal adopts a unique "Z"shape cross-section design. The overall structure is compact and lightweight, and itcan be configured with single-lip or double-lip structuresas needed.The surface has high glossiness. Itscoreadvantage liesin its excellent high-speed compatibility,which can beadapted to rotating scenarioswith a rotational speed greater than 6 { { m } / { { s } } } The compact structure significantly reduces frictional heat during high-speed rotation.Combined with theexcellent rebound performanceof thelip,it can not only stablyachieve sealingand dust-proof effects but also significantly reduce space occupation, suitable for various deviceswith limited installation space.However,thisoil seal has average pressure resistance performance and requires high installation accuracy.Ithas beenwidelyused in high-speed motor shafts,dust-proof of precision machine tool main shafts,and sealing of rotating parts of precision equipment,especially suitable forworkingconditions thatrequire high-speed operation and low friction characteristics.
Productmaterial:(NBR),(FKM) Temperature resistance range: NBR: - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } to + 2 8 0 ^ { \circ } { C }
VDA水封
VDAWATERSEAL
产品特点：VDA水封采用截面呈“V”形与双 ^ { \prime \prime } \mathsf { U } ^ { \prime \prime } 形结合的复合结构，唇口带有双向密封唇边，整体结构对称度高；它的核心优势在于双向承压密封能力优异，抗污染性能突出，可适配含泥沙等复杂介质的工况，同时结构适配空间紧凑的设备安装需求；不过该水封对安装沟槽的精度要求较高，在高转速工况下摩擦生热相对较大，因此更适用于介质压力波动频繁的场景，广泛应用于小型马达、精密减速机、电动工具、精密仪器等设备中；选型时需优先考虑低摩擦配方胶料，并通过合理设计沟槽深度，平衡密封力与摩擦力，以适配不同工况的使用需求。
产品材质：丁腈(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C }
Product features:The VDA water seal adopts a composite structure combininga "V" shape cross-section with two "U" shapes.The lip edge isequipped with bidirectional sealing lips,and the overall structure has high symmetry.Its core advantage lies in its excellent bidirectional pressure-bearing sealing ability and outstanding anti-contamination performance.It can be adapted to working conditions with complex media such as sand-containing substances.At the same time, the structure is suitable for the installation requirements ofcompact equipment.However,thiswaterseal hasahigh requirement for the precision of the installation groove,and the friction generates more heat under high-speed conditions.Therefore,it is more suitable for scenarios with frequent pressure fluctuationsand is widely used in small motors, precision reducers,power tools,and precision instruments,etc.When selecting,priority should be given to low-friction formula rubber materials, and the depth of the groove should be reasonably designed to balance the sealing force and friction force to meet the usage requirements of different conditions.
Productmaterials:(NBR),(FKM) Tem: - 3 0 ^ { \circ } { C } { ~ } + 1 0 0 ^ { \circ } { C } V FKM: - 2 0 ^ { \circ } { C } { ~ } + 2 8 0 ^ { \circ } { C }
VDS水封
VDSWATERSEAL
产品特点：VDS水封采用截面呈“V”形的结构设计，唇口带有防尘唇边，支持单唇或双唇结构，依靠唇口自身过盈实现预紧；它兼具防尘与密封双重功能，高压工况下跟随性好、抗挤出能力强，且不存在弹簧卡滞的风险，广泛适用于通用机械、水泵、电机、减速机的防尘防水场景，以及高温电机、冶金设备、高温风机等耐高温工况；不过该水封对轴面光洁度要求较高（ \mathsf { R a } <=slant 0 . 8 \mu \mathsf { m } ) ，需要精准控制唇口过盈量；作为高压防尘场景的首选产品，选型与安装时需匹配轴面硬度 > H R C 5 5 ，沟槽设计需预留 3 % ~ 5 % 的唇边压缩量，同时避免过盈量过大导致密封件早期磨损。
产品材质：丁腈(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C } FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
Product features:TheVDSwatersealadopts a"V"-shaped cross-sectional structure design. The lip edge is equipped with a dust-proof lip. Itsupportssingle-lipordouble-lipstructuresand achieves pre-tightening through the self-integration ofthe lip edge.It has both dust-proof and sealing functions.It has good followability under high-pressure conditions,strong resistance to extrusion,and no riskof spring jamming.Itiswidelyapplicablein scenarios for dust and water prevention in general machinery,water pumps,motors,reducers,as well ashigh-temperaturemotors,metallurgical equipment, and high-temperature fans,etc.,under high-temperature workingconditions.However,thiswaterseal requires high requirements for the surface finish of the shaft ( { R a } <= 0 . 8 ~ \mu { m } ) ,and the over Output volume of the lip edge needs to be precisely controlled.As the preferred product for high-pressure dust-proof scenarios,the selection and installation must match thehardnessof the shaft surface >= { { H R C } } 5 5
The groove design should reserve 3 % to 5 % of the lip edge compression,and avoid excessive over Outputvolume thatleadsto earlywear of the sealing component.
Product materials: (NBR),(FKM)
Temperature range: NBR: - 3 0 ^ { \circ } { C } { ~ } + 1 0 0 ^ { \circ } { C } FKM: { } - 2 0 ^ { \circ } { C } { ~ } + 2 8 0 ^ { \circ } { C }
V
VDL水封
VDLWATERSEAL
产品特点：VDL水封采用截面呈“L”形与 ^ { \prime \prime } \mathsf { V } ^ { \prime \prime } 形的组合结构，为单唇设计并自带轴向定位凸台，轴向定位精准且安装便捷；它具备低摩擦扭矩的特性，适配高速轻载场景，广泛应用于矿山机械、洗煤机、造纸机这类多尘多水环境，以及高温设备、化工搅拌轴等工况；不过该水封抗高压挤出能力较弱，仅适用于洁净介质；VDL专为高速洁净水环境设计，线速度可达 2 5 \mathsf { m } / \mathsf { s } ，选型与安装时需保证介质洁净度符合IS04406:199918/15级标准，同时沟槽需预留 0 . 2 { ~ } 0 . 5 \mathsf {mm } 的轴向间隙，以保障其稳定运行。
产品材质：丁晴(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } mathsf C ~ + 1 0 0 ^ { \circ } \mathsf C FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
Product features:The VDL water seal adopts a combined structure of "L" shape and "V" shape with a single lip design and an axial positioning protrusion.It has precise axial positioning and is easyto install.It has the characteristic of low friction torque and is suitable for high-speed and light-load scenarios.It is widely used in miningmachinery, coal washing machines,paper machines,etc., industyandwater-richenvironments,aswellas inhigh-temperature equipment and chemical stirring shafts,etc.However,thiswatersealhasweak resistance to high-pressure extrusion and is only suitable forcleanmedia.VDL is specificallydesigned for high-speed clean water environments,with a linearspeed ofup to 2 5 { m / s } .When selecting and installing,it is necessary to ensure that the medium cleanlinessmeets theISO 4406:199918/15 grade standard.At the same time,the groove needs to reserve an axial gap of 0 . 2 { ~ } 0 . 5 {mm } to ensure its stableoperation.
Productmaterials:(NBR).(FKM)
Temperature range:
NBR: - 3 0 ^ { \circ } { C } { ~ } + 1 0 0 ^ { \circ } { C } （20号
FKM: { } - 2 0 ^ { \circ } { C } { ~ } + 2 8 0 ^ { \circ } { C }
RBR水封
RBRWATERSEAL
产品特点：RBR水封采用截面呈“双 { \sf R } ^ { \prime \prime } 弧形的双唇结构，自适应能力突出，可补偿轴的径向跳动（ <= 0 . 5 \mathsf {mm } ），耐磨损寿命长，广泛适用于食品加工设备、清洗设备、化工泵、反应釜等耐高压冲洗、耐腐蚀的工况；不过该水封结构复杂、成本较高，且对沟槽加工精度要求严苛；其核心价值在于补偿轴跳动，选型时需根据轴的跳动量选择适配的O型圈硬度，同时沟槽需预留压缩余量 (O型圈压缩率1 5 % { ~ } 2 0 % ），以保障密封性能稳定可靠。
产品材质：丁晴(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
Product features:TheRBRwaterseal adopts a double-lip structurewitha "doubleR"arc-shaped cross-section.It has outstandingadaptability and can compensate for the radial movement of the shaft ( { \le } 0 . 5 {mm } ) ).It has a long wear resistance life and is widely applicable to food processing equipment,cleaning equipment,chemical pumps, reaction vessels,etc.,for high-pressure flushing and corrosion-resistant conditions.However, this water seal structure is complex,has a high cost,and requires strict processingaccuracy for the grooves;its core value lies in compensating forthe shaft'smovement.When selecting,the hardness of the O-ring should be chosen based on the shaft'smovement amount,and the compression allowance for the groove needs to be reserved (O-ring compression rate 1 5 % { ~ } 2 0 % )toensure stableand reliable sealing performance.
Product materials: (NBR), (FKM)
Temperature range: NBR: - 3 0 ^ { \circ } { C } { ~ } + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } { ~ } + 2 8 0 ^ { \circ } { C }
K
O
VAX水封
VAXWATERSEAL
产品特点：VAX水封采用截面呈 " \boldsymbol { \mathsf { V } } ^ { \prime \prime } 形与 " \mathsf { X } ^ { \prime \prime } 形结合的复合结构，搭配多唇口分级密封设计，耐压等级高，耐高温性能优异，既适配非标设备、专用机床的常规工况定制，也可满足极端高温或强腐蚀等特殊定制工况；不过该水封安装空间需求较大，在高转速工况下发热明显；作为针对极端工况定制的产品，选型与安装时需核算沟槽的散热面积，建议搭配冷却系统，且多唇口安装时需按序操作，避免唇边翻卷影响密封性能。
产品材质：丁晴(NBR)、氟胶(FKM)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } \mathsf { C } ~ + 2 8 0 ^ { \circ } \mathsf { C }
Product Features:The VAX water seal adopts acompositestructurecombininga "V"shapeand an "X"shape in cross-section,along with a multi-lip mouth graded sealing design.It hasa high pressure resistance level and excellent high-temperature performance.Itis suitable forcustomizingregular working conditionsof non-standard equipment and special machines,and can also meet special customized workingconditions suchas extreme high temperatures or strong corrosion.
However,this water seal requiresa large installation space,and it generates significant heat under high-speed operation.Asa customized product for extreme conditions,when selecting and installing, the heat dissipation area of the groove needs to be calculated.It is recommended to be paired with a cooling system.When installing multiple lips, the operation sequence should be followed to avoid lip edges curling and affecting the sealing performance.
ProductMaterials:(NBR),(FKM) Temperature Resistance Range:
NBR: - 3 0 ^ { \circ } { C } { ~ } + 1 0 0 ^ { \circ } { C } （204号 FKM: - 2 0 ^ { \circ } { C } { ~ } + 2 8 0 ^ { \circ } { C }
V
液压油封 Hydraulicoil seal
10 DO 0101000
ODU/YXD孔用密封圈 ODU/YXDSEALINGRINGFORHOLES
产品标准：
本标准适用于液压油缸活塞中起往复运
动的密封件。产品材质：丁腈(NBR)、氟胶(FKM)、
聚氨酯(PU)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C PU: - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C } 工作压力：32Mpa工作介质：液压油、水产品硬度： 8 5 \mathsf { A } ± 5 标准来源：JB/ZO4264-86取代Q/ZB248-77
Product standards:
This standard is applicable to the sealing
components that perform reciprocating
motion in thehydraulic cylinder piston. Product materials: (NBR), (FKM),(PU) Temperature range: NBR: - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } to + 2 4 0 ^ { \circ } { C } （204号 PU: \mathbf { - } 3 0 ^ { \circ } \mathbf { C } to + 8 0 ^ { \circ } { C } Working pressure: 3 2 { { M p a } } Workingmedium:Hydraulicoil,water Producthardness: { 8 5 } \mathbf { A } ± { 5 } Standard source:JB/ZO4264-86 ReplacementofQ/ZB248-7
0
KDAS组合活塞密封圈 KDASCOMBINEDPISTONSEALINGRING
KDAS组合活塞密封件
KDAS combined piston seal
KDAS是5件组合双向活塞密封，橡胶密封圈两侧有防挤圈，防止橡胶圈挤入间隙而损伤，最外侧的L型圈的导向套。
工作压力：500MPa(500巴)
速度：最高 0 . 5 \mathsf { m } / \mathsf { s }
硬度：邵氏A级78度
KDAS is a5-piece combination two-way piston seal,with anti-extrusionrings on both sidesof the rubber sealing ring to prevent the rubber ringfrom beings queezed into the gapand damaged,and the guide sleeve of the outermost L-ring ring.
安装Installation
Working pressure:500MPa (500 bar) Speed:up to \mathbf { 0 . 5 m / s } （204号 Hardness:ShoreA grade 78degrees @0
安装组合活塞密封KDAS简单容易，和安装其它组合密封基本上相同，请按图示顺序安装。 Installing the piston seal KDAS is simple and easy.It is basically the sameas installing other combined seals.Please follow theillustrated sequence forinstallation.
1、防挤圈
2、橡胶密封圈
3、防挤圈
4、L形支承圈
1.Anti-squeezing ring
2.Rubber sealing ring
3.Anti-squeezing ring
4.L-shaped support ring
尺寸数据Sizedata
ST-D形孔用组合密封圈（格莱圈) ST-D TYPE COMBINED SEALING RING (SPGO)
ST-D组合密封
ST-D组合密封是两件组合密封，由一个动圈和一个O型圈组成，O型圈提供弹力。
它作为活塞密封，应用于双作用活塞和单作用活塞中。
材料Materials
W O-ringo型圈 格来图SPGO
| 动圈Dynamic coil | |
| 材料 Materials | PTFE60%+青铜粉40% PTFE60%+BronzePowder40% |
| 硬度 Hardness | Hs≥98°A Hs≥98A |
| O型圈O-ring | |
| 材料 Materials | 丁晴橡胶NBR 氟橡胶FKM Nitrile rubberNBR Fluorine rubber FKM |
| 硬度 Hardness | 邵氏A70度 邵氏A70度 ShoreA70 degree ShoreA 70 degree |
安装Installation
安装时，先把0型圈装入槽内，然后把动圈变形成卵形装入槽内，使用专门的安装工具，可以方便地安装小直径的组合密封圈。
During installation,first insert the O-ring into the groove,then shape the moving ring into an oval shape and insert it into the groove.Byusing a specialized installation tool,itis convenient to install the small-diameter combined sealingring.
ST-D Combined seal
The ST-D combined seal consists of two parts.The combined seal is composed of a moving ring and an O-ring. The O-ring
provides the elasticity. It functions as a piston seal and should be used in both double-acting pistons and single-acting pistons.
| 技术数据Technicaldata | |
| 特点 | 很高的承压能力和硬度，导热好，优 异的抗挤出（冷流）能力，非常耐磨。 Characteristics High pressure-bearing capacity and hardness, good heat conductivity,excellent anti-extrusion (cold flow) ability,and extremely wear-resistant. |
| 适用条件 Applicable conditions | 很高的机械载荷，高速，高压，中等 频率，较高的温度。 Veryhighmechanical load,highspeed, high pressure,medium frequency, relativelyhightemperature. |
| 工作温度 Working temperature | NBR:-30C至+100℃FKM:-20℃至+240℃ |
| 工作压力 Workstress | 50MPa (500巴) 50MPa (500 bar) |
| 速度 Speed | 最高15m/s Up to15 meters per second |
公差Tolerance
| 公称直径D Nominal diameterD | D | d | df |
| ≥36 | H8 | h9 | h7 |
| >36...250 | H9 | h8 | h8 |
| >250..500 | H8 | h8 | h8 |
| >500...1000 | H7 | h7 | -0.1 |
OK孔用组合封活塞密封圈
OKCOMBINEDPISTONSEALINGRING
OK组合封
用途与性能：主要用于液压缸活塞密封，该密封有两个元件组成，一个是用特殊材料制成的硬度很高的开口密封环，另一个是可提供弹力的橡胶O型圈。由于密封环采用开口结构，解决了格来圈需专用工具安装的问题。OK封安装空间小，沟槽简单。安装简单方便，无需配工具，可抵抗冲击负载，较低摩擦阻力，无粘滞现象，优良的耐摩檫性能。
产品材质：聚甲醛(POM) ^ + 丁晴(NBR)
温度范围： P O M + N B R ： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C
工作速度： 1 { m } / \varsigma 工作压力：0--80Mpa
介质：石油基液压油，难燃液压液，环保安全液压液（生物油），水和其它，取决于密封圈材料。
08 O
OK Combination seal
Usageand Performance:Primarilyused for sealing the pistonofhydraulic cylinders.This seal consists of two components.One is a hard-opening sealingringmadeofspecial materials,and the otherisarubber O-ring that provides elasticity. Due to the open structure of the sealing ring,it solves the problem of the need for special tools for installing the (SPGO).The OK seal hasa small installation space and simple grooves.The installation is simple and convenient,no tools are required, it can resist impact loads,has low friction resistance, no stickiness phenomenon,and has excellent wearresistance performance.
Productmaterial:POM+NBR Temperature range: \mathbf { P O M } + \mathbf { N B R } ： - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C } Working Speed: \mathbf { l m / s } Working Pressure: \mathbf { 0 - 8 0 \ M p a } Medium:Petroleum-based hydraulic oil,
non-flammablehydraulic fluid,
environmentally friendlyand safehydraulic
fluid (biological oil),water and others,
dependingon thematerial of the sealingring.
SPGW活塞封组合密封圈 SPGWPISTONSEALINGASSEMBLYSEALINGRING
SPGW组合密封圈
SPGW型双向活塞密封是由PTFE活塞密封环，橡胶弹簧及两个抗撤出挡圈组成，用于液压油缸的活塞密封。SPGW是一种高压操作的密封件，改进了SPG刮油能力。
应用范围：适用于铲车转臂缸，悬臂缸，铲斗缸。推土机起升缸，平铲缸，起重机滑动缸，液压悬架油缸，自卸卡车，压力机，注塑机等。
产品材质：聚四氟(PTFE) ^ + 丁晴（NBR) ^ + 聚 甲醛(POM)、聚四氟(PTFE) ^ + 氟胶(FKM)
耐温范围：
PTFE+NBR+POM： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C
PTFE ^ + FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C
工作压力：40MPa
往复速度： 1 . 5 \mathsf { m } / \mathsf { s }
安装：这类密封件可采用整体式活塞。为避免密封唇损坏，安装时应当采取措施避开锐边。
SPGW Combined sealing ring
The SPGW type bidirectional piston seal is composedofPTFE piston sealingrings,rubber springs and two anti-extraction retaining rings, and isused for piston sealing in hydraulic cylinders. SPGW isa high-pressure operating seal that improves the scraping oil capacity of SPGW.
Application scope:Suitable for bucket arm cylinders,boomcylinders,bucketcylinders of forklifts,liftingcylindersof bulldozers,flatshovel cylinders,slidingcylindersofcranes,hydraulic suspension cylinders,dump trucks,presses,injection moldingmachines,etc.
Productmaterial: \mathbf { P T F E } + \mathbf { N B R } + \mathbf { P O M } , （20 PTFE ^ + FKM Temperature resistance range: PTFE ^ + NBR ^ + POM: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } PTFE ^ + FKM: - 2 0 ^ { \circ } { C } ~ + 2 4 0 ^ { \circ } { C } Working pressure: 4 0 { M P a } Repetitive speed: 1 . 5 ~ { { m / s } } （204号 Installation:This type of seal can use a complete piston.To avoid damage to the sealinglip,measuresshould be taken toavoid sharp edges during installation.
K16活塞三件套组合油封 K16PISTONTHREE-PIECEASSEMBLYOILSEAL
K16组合油封
K16是一种三件式双作用紧凑型密封件，由一个织物增强弹性密封元件和两个热塑性导向支撑环组成。
产品材质：丁腈(NBR) ^ + 织物 ^ + 聚甲醛(POM)
耐温范围： N B R + 织物+POM: - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C
O
产品优势
低摩擦无粘滑
提高耐磨性
良好的动态和静态密封
使用寿命长
应用
采矿设备、钢铁工业、船用液压和土方设备
安装
K16型材设计用于安装在封闭或开放的凹槽中，并考虑了指示的目录信息，对于①小于5 0 { {mm } } 的尺寸，我们建议采用开槽设计。组装工具必须是柔软的材料并且没有锋利的边缘，这一点非常重要，在安装之前，必须用系统油给密封元件上油。
K16CombinedOilSeal
K16 is a three-piece double-acting compact seal,consistingofa fabric-reinforced elastic sealing element and two thermoplastic guiding support rings.
Productmaterial:NBR ^ + fabric ^ + POM Temperature resistance range: NBR ^ + fabric ^ + POM: - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C }
Productadvantages
Low friction No stickiness or slippage Enhanceswearresistance Excellent dynamic and static sealing Long service life
Application
Mining equipment, steel industry, Marine hydraulic and earthmoving equipment
Installation
TheKl6 profileisdesigned forinstallation in either closed or open grooves,and takes into accountthe indicateddirectoryinformation.For dimensions smaller than 5 0 {mm } in diameter,we recommend usinga grooved design.The assembly toolsmustbemadeof softmaterialsandwithout sharp edges,which isof great importance. Before installation,the sealing elements must be oiled with system oil.
K20型三件套组合油封 K20TYPETHREE-PIECECOMBINEDOILSEAL
K20型三件套组合油封
K20是三件套的双向组合封，由一个丁睛橡胶密封环和两个热塑性塑料的导向环组成。产品材质：丁睛 ( N B R ) + 聚甲醛(POM)耐温范围： N B R + P O M ： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C
产品优势
经济的密封和导向解决方案
简单的满槽设计，整体式活塞
能在小截面上使用
易安装
安装
由于导向环是开口形式，所以很容易安装到整体式活塞，非常重要的是安装工具必须是软材料并且没有锐角，在安装之前，此密封件必须涂上系统用压力油。
CCO
K20 type three-piece combined oil seal
K20 isa three-piece bidirectional combined seal,consisting of an nitrile rubber sealing ring and two thermoplastic plastic guide rings.
Product material: \mathbf { N B R } + \mathbf { P O M } Temperature resistance range: \mathbf { N B R } + \mathbf { P O M } ：： - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C }
Product advantages
Economic sealing and guiding solutions Simple full-tank design,integral piston Can be used on small sections Easy to install
Installation
Since the guide ring is of an open type,it can be easily installed onto the integral piston.It is veryimportantthatthe installation toolmustbe madeof soft material and haveno sharp edges. Before installation,thissealmustbecoated with the system's pressure oil.
DPM五组合液压油缸活塞密封圈 DPMFIVE-PIECEPISTONSEALINGRING
DPM是由五部分组成，是一种双向作用的密封和导向元件，由1个橡胶圈，2个承托环和2个导向环组成。橡胶圈动态和静态时都能起到良好的密封作用，承托环可防止橡胶圈被挤入密封间隙，导向环的作用是使活塞在缸筒内导向并吸收径向力；橡胶圈在受压时会将承托环和导向环推向缸壁，因此即使组合封被磨损后仍能得到压力补充。
活塞组合封的突出特点是挡圈，导向环和密封件安装于一个沟槽，极大的节省安装空间。常用于一体式活塞和缸径较小的油缸，活塞上不需要安装其他密封件。主要用于运动速度较低，内泄漏量要求严格，活塞密封安装空间有限的油缸。如推土机，挖掘机，装载机，液压闸门和农业机械等。
产品材质：丁晴(NBR) ^ + 聚甲醛(POM) 耐温范围： N B R + P O M . - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C
1 0 Cee
TheDPMis composed of five parts and is a bidirectional sealingand guiding element.It consists of1rubber ring,2 supporting rings and 2guiding rings.The rubber ring can provide good sealingbothdynamicallyandstatically.The supporting rings can prevent the rubber ring from beingpushed into the sealing gap.The guiding rings' function is to guide the piston within the cylinderandabsorbradialforces.Whentherubber ringisunder pressure,it pushes the supporting ringand guidingring towards the cylinder wall. Therefore,even if the combined seal is worn out, pressure can still be replenished.
The prominent feature of the piston combined seal is that the retaining ring,guiding ring and sealing element are installed ina groove,which greatly saves installation space.Itis commonly used in integral pistonsandcylinders with a smaller diameter.Noothersealsneedto be installed on the piston.Itis mainlyused in hydraulic cylinders with low motion speed,strict requirements for internal leakage,and limited installation space for piston seals.Such as bulldozers,excavators, loaders,hydraulic gatesand agricultural machinery,etc.
Product material: \mathbf { N B R } + \mathbf { P O M }
Temperature resistance range:
NBR ^ + POM: - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C }
U+S组合型密封圈
U+SCOMBINATIONSEALS
_ { \mathsf { U } + \mathsf { S } } 是组合型密封圈。星型圈保证了在低压或真空条件下的预压缩量，系统压力通过星形圈传递到U型圈的密封唇口，U型圈随着系统压力的增加而负载，密封效果基本与温度的变化无关，当U型圈有一定磨损时，星型圈起到补偿的作用，保证其密封效果。
优点： \mathsf { U } { + } \mathsf { S } 具有很好的耐磨性能和抗挤压性能，对震动载荷和压力峰值不敏感，在无载荷和低温条件下具有理想的密封作用，适用于苛刻的工作环境，便于安装。
产品材质：聚氨酯 ( \mathsf { P U } ) + 丁睛(NBR)
耐温范围： - 3 5 ^ { \circ } C ~ + 1 1 0 ^ { \circ } C
工作介质：石油基液压油、乳化液、不适用于环保安全生物油。
适用范围：广泛适用于农业机械、液压设备、石油机械等。
\mathbf { U } { + } \mathbf { S } is a combined type sealing ring.The star-shaped ring ensures the pre-compression amount under low pressure or vacuum conditions. The system pressure is transmitted to the sealing lip of the U-shaped ring through the star-shaped ring.TheU-shaped ringisloadedasthesystem pressure increases,and the sealing effect is basically independent of temperature changes. When theU-shaped ringis slightlyworn, the star-shaped ringplaysa compensatoryrole to ensure its sealing effect.
Advantages: \mathbf { U } { + } \mathbf { S } hasexcellentwearresistance and compression resistance.Itis insensitive to vibrationloadsand pressure peaks.Ithasan ideal sealingeffectintheabsenceofloadandatlow temperatures,and is suitable for harsh working environments.Itis easyto install.
Productmaterial: \mathbf { P U } + \mathbf { N B R }
Temperature resistance range:
\mathbf { P U } + \mathbf { N B R } . - 3 5 ^ { \circ } { C } to + 1 1 0 ^ { \circ } { C }
Workingmedium:Petroleum-based hydraulic oil,emulsion,not suitable forenvironmentally friendly,safe,andbiological oils.
Application scope:Widelyapplicable to agricultural machinery,hydraulic equipment, petroleummachinery,etc.
KR双向活塞组合密封圈 KRBIDIRECTIONAL PISTONCOMBINED SEALINGRING
KR型聚氨酯材料活塞组合密封件是和OK型及格莱圈等活塞封具有相同的安装沟槽（符合IS07425-1标准)的双作用活塞密封，特别适合中等载荷工况。KR组合封作为双向密封有着非常好的动态和静态密封性能，其滑动环材料非常耐磨损。KR活塞封可用于蓄能器。KR组合封由一件改善了润滑特性的高模量的聚氨酯滑动环以及矩形截面的丁腈橡胶弹性赋能圈组成。KR型活塞组合密封可用于油缸或蓄能器。特别适合用于对内泄漏要求严格的场合。
产品优点：特高的动、静态密封性能，亦适用于单向作用，极好的耐磨性。
产品材质：聚氨酯 ( \mathsf { P U } ) + 丁晴(NBR)
耐温范围： - 3 5 ^ { \circ } C ~ + 1 1 0 ^ { \circ } C 介质：液压油 (矿物油基)
TheKR type polyurethanematerial piston assembly seal isa double-actingpiston seal with the same installation groovesas the OK type and (SPGO) etc.(in compliance with ISO7425-1 standard),andisparticularlysuitableformedium loadconditions.TheKRassemblyseal,asa bidirectional seal,has excellentdynamicand static sealing performance,and its sliding ring materialis verywear-resistant.TheKR piston seal can be used in accumulators.The KR assembly seal consistsofa high-modulus polyurethane sliding ringwith improved lubrication properties andarectangular-sectionnitrilerubberelastic reinforcement ring.TheKR pistonassemblyseal can be used in cylinders or accumulators.It is particularlysuitable forapplicationswith strict requirements for internal leakage.
Productadvantages:Extremely high dynamic and static sealingperformance,also suitable for unidirectional action, excellent wear resistance.
Productmaterial: \mathbf { P U } + \mathbf { N B R }
Temperature resistance range:
PU+NBR: - 3 5 ^ { \circ } { C } to + 1 1 0 ^ { \circ } { C }
Medium:Hydraulicoil (mineraloil-based)
IDU/YXd轴用密封圈
IDU/YXdAXIAL SEALINGRING
产品标准：
本标准适用于液压油缸活塞中起往复运动
的密封件。产品材质：丁睛(NBR)、氟胶(FKM)
聚氨酯(PU)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C PU: - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C } 工作压力： <=slant 3 2 M \mathsf { P a } 工作介质：液压油、水产品硬度： 8 5 \mathsf { A } ± 5 标准来源：JB/ZO4264-86取代Q/ZB249-77
Productstandards
This standard is applicable to the sealing
componentsthatperformreciprocatingmotion
in the hydraulic cylinder piston. Productmaterials:NBR,FKM,PU Temperature range: NBR: \mathbf { - } 3 0 ^ { \circ } \mathbf { C } to + 1 0 0 ^ { \circ } \mathbf { C } （204号 FKM: - 2 0 ^ { \circ } { C } to + 2 4 0 ^ { \circ } { C } （204号 PU: - 3 0 ^ { \circ } { C } to + 8 0 ^ { \circ } { C } Workingpressure: <= 3 2 { { \mathbf { M P a } } } Workingmedium:Hydraulic oil,water Product hardness: { 8 5 } \mathbf { A } ± { 5 } （204号 Standard source:JB/ZO4264-86 ReplacingQ/ZB249-7
ST-d形轴用组合密封圈(斯特封)ST-d TYPE COMBINED SEALING RING (SPNO)
ST-d组合密封
ST-d组合密封是两件组合密封，由一个动圈和一个O型圈组成，O型圈提供弹力。
它作为活塞密封，应用于双作用活塞和单作用活塞中。
产品材质：四氟铜粉 ^ + 丁腈(NBR) 四氟铜粉 ^ + 氟胶（FKM)
耐温范围： 四氟铜粉 ^ + NBR: - 3 0 ^ { \circ } { C } \mathord { ~ } + 1 0 0 ^ { \circ } { C } 四氟铜粉 ^ + FKM: - 2 0 ^ { \circ } { C } ~ + 2 4 0 ^ { \circ } { C }
ST-d type combined seal
The ST-d combined seal is a two-piece combined seal, consisting ofamoving ring and an O-ring.The O-ring provides elasticity.
Itservesasapistonseal and isused in both double-acting pistons and single-acting pistons.
Productmaterial:PTFE+Bronze+NBR PTFE+Bronze+FKM
Temperature resistance range: PTFE ^ + Bronze+NBR: - 3 0 ^ { \circ } { C } { ~ } + 1 0 0 ^ { \circ } { C } PTFE ^ { + } Bronze+FKM: - 2 0 ^ { \circ } { C } ~ + 2 4 0 ^ { \circ } { C }
材料Materials
| 动圈 Dynamic coil | ||
| 材料 Materials | PTFE60%+青铜粉40% PTFE 60%+BronzePowder40% | |
| 硬度 Hardness | Hs≥98°A Hs≥98A | |
| 0型圈 O-ring | ||
| 材料 Materials | 丁腈橡胶NBR | 氟橡胶FKM Nitrile rubberNBR Fluorine rubber FKM |
| 硬度 Hardness | 邵氏A70度 Shore A 70 degree | 邵氏A70度 ShoreA70 degree |
| 技术数据 | Technical data | |
| 特点 | 很高的承压能力和硬度，导热好，优 异的抗挤出（冷流）能力，非常耐磨。 Characteristics High pressure-bearing capacity and hardness, good heat conductivity,excellent anti-extrusion (cold flow)ability,and extremelywear-resistant. | |
| 适用条件 Applicable conditions | 很高的机械载荷，高速，高压，中等 频率，较高的温度。 Veryhighmechanical load,highspeed, high pressure,medium frequency, relativelyhightemperature. | |
| 工作温度 Working temperature | NBR:-30℃至+100℃FKM:-20℃至+240℃ | |
| 工作压力 Workstress | 50MPa (500巴) 50 MPa (500 bar) | |
| 速度 Speed | 最高15m/s Up to 15 metersper second | |
UHS液压油缸密封圈
UHSHYDRAULICCYLINDERSEAL
UHS是液压缸中最常用的油封，它是一种典型的唇口密封件，无论用于活塞还是活塞杆都能获得良好的密封效果。主要应用于重载行走机械或工业液压中的活塞或活塞杆密封。
产品材质：丁腈(NBR)、氟胶(FKM)、聚氨酯(PU)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C PU: - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C } 主要优点：1.优异的耐磨损性能2.对冲击载荷和压力峰值不敏感3.很高的抗挤出能力4.低永久压缩变形5.适用于恶劣的工况6.安装容易
产品介质：液压油 产品硬度：邵氏A90±2
UHS is the most commonly used oil seal in hydraulic cylinders.Itisa typical lip-type sealing component that can achieve excellent sealing performancewhether itisused for the piston or the piston rod.It is mainly applied in the sealing of pistons or piston rodsin heavy-duty mobile machinery orindustrialhydraulics.
Productmaterial:NBR,FK,PU Temperature resistance range: NBR: \mathbf { - } 3 0 ^ { \circ } \mathbf { C } to + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } to + 2 4 0 ^ { \circ } { C } （20 PU: - 3 0 ^ { \circ } { C } to + 8 0 ^ { \circ } { C } Main advantages: 1.Excellent wear resistance 2.Insensitive to impact loads and pressure peaks 3.High resistance to extrusion 4.Low permanent compression deformation 5.Suitable for harsh working conditions 6.Easy to install Productmedium:Hydraulicoil Product hardness:Shore A 9 0 ± 2
Q
UNS液压油封密封圈
UNSHYDRAULICOILSEALSEALINGRING
UNS液压油封密封圈广泛应用于一般机械设备的液压系统，因其结构设计既适用于活塞密封又适用于活塞杆密封，所以建议不适合于对密封要求较高的工作条件，它的密封效果不如专用的活塞密封或专用的活塞杆密封件。
产品材质：丁腈(NBR)、氟胶(FKM)、聚氨酯(PU)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C PU: - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C } 主要优点：1.通用性强，选用方便2.耐磨性好3.压缩变形小4.安装极方便
表面速度： { <=slant } 0 . 5 \mathsf { m } / { \mathsf { s } } 硬度： 9 2 A ± 2
C
TheUNShydraulic oil seal ring iswidely used in the hydraulic systems of general mechanical equipment.Due to its structural design that is suitable for both piston sealingand piston rod sealing,itisrecommendednottobeusedin working conditions with high sealing requirements. Itssealing effect isnot as goodas the dedicated piston seal or the dedicated piston rod seal component.
Productmaterial:NBR,FKM,PU
Temperature resistance range:
NBR: - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C } （204号
FKM: - 2 0 ^ { \circ } { C } to + 2 4 0 ^ { \circ } { C }
PU: - 3 0 ^ { \circ } { C } to + 8 0 ^ { \circ } { C }
Mainadvantages: 1.Strong versatility,easy to select 2.Good wear resistance 3.Small compression deformation 4.Extremely convenient installation
Surface speed: <= 0 . 5 \ { m / s } Hardness: 9 2 \mathbf { A } ± 2 （20
V型夹织物密封圈
V-CLAMPFABRICSEAL
产品用途：用于往复运动超高压液压油缸活塞与活塞杆的密封
适用范围：冶金，矿山，通用设备液压油缸
产品材质：丁睛(NBR ^ + 织物、氟胶（FKM) ^ + 织物
耐温范围：
N B R + 织物： - 3 0 ^ { \circ } \mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C }
\mathsf { F K M + } 织物： - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C
产品硬度： 9 5 { ± } 2 ^ { \circ } A
工作压力： { <=slant } 6 0 M { \mathsf { P a } }
工作介质：液压油
标准来源：HG4-337-66（A型）G51-3
Productapplication:Used for sealing the piston and piston rod of reciprocating motion ultra-high pressure hydraulic cylinders
Application scope:Metallurgy,mining,general equipmenthydraulic cylinders
Productmaterial:
NBR ^ + fabric, \mathbf { F K M + } fabric
Temperature resistance range:
NBR ^ + fabric: \mathbf { - } 3 0 ^ { \circ } \mathbf { C } to + 1 0 0 ^ { \circ } { C }
\mathbf { F K M + } fabric: \mathbf { - } 2 0 ^ { \circ } \mathbf { C } to + 2 4 0 ^ { \circ } { C }
Product hardness: 9 5 ± 2 ^ { \circ } \mathbf { A }
Working pressure: { <= } 6 0 \ \mathbf { M P a } （204号
Workingmedium:Hydraulic oil
Standard source:
HG4-337-66 (Type A) G51-3
凸面 凸面 平面支撑环 密封环 压环000正面拍摄展示图压环 密封环 支撑环凹面 凹面 底面背面展示图拍摄
JA型无骨架防尘圈
JATYPENOSKELETONDUSTSEALRING
产品用途：用于往复运动液压油缸活塞杆的防尘。JA防尘圈是液压气动系统的重要防护元件，通过阻挡外部杂质进入，保护内部密封件和运动部件，确保系统长期稳定运行，特别适用于工况复杂的工程机械和工业设备。
产品材质：丁睛(NBR)、氟胶(FKM)、聚氨酯(PU)
耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C PU: - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C }
硬度： { \mathsf { H S 8 5 } } ^ { \circ } A
产品介质：JA防尘圈标准适配矿物油基液压油和压缩空气，在特定条件下可用于水、乳化液、水-乙二醇等介质环境。
标准来源：农机行业标准简记：JAd60
ProductUsage:Used for dust prevention of the piston rods of reciprocating hydraulic cylinders. TheJA dust ringisan important protective component in hydraulic and pneumatic systems. It prevents external impurities from entering, protecting internal seals and moving parts, ensuring the long-term stable operation of the system.Itisparticularlysuitableforcomplex workingconditionsinconstructionmachinery and industrial equipment.
ProductMaterials:NBR,FKM,PU Temperature Range: NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } ~ + 2 4 0 ^ { \circ } { C } PU: - 3 0 ^ { \circ } { C } { ~ } + 8 0 ^ { \circ } { C } Hardness: { { H S } } 8 5 ^ { \circ } { \bf A } Product Medium:The JA dust ring is standardly
compatiblewithmineraloil-based hydraulic
oil and compressed air.Under specific conditions,
it can also be used in water,emulsion,water -
ethylene glycol and othermedium environments.
Standard Source:Agricultural Machinery IndustryStandard
Abbreviation:JAd60
C D
FA型防尘圈
FATYPEDUSTSEALRING
产品用途：用于往复运动液压油缸活塞杆的防尘。
FA防尘圈是无骨架单唇嵌入式往复运动防尘圈，结构紧凑、省安装空间且装拆方便；常用NBR、PU、FKM三种主流材质，NBR耐油通用、PU超高耐磨，FKM具备耐高温、耐酸碱、耐化学腐蚀的特性，适配恶劣高低温及特殊介质工况，整体摩擦阻力小，可有效刮除活塞杆表面灰尘、砂石、金属碎屑，阻挡外界杂质进入油缸内部，保护内部密封件与导向件，广泛用于工程机械、机床、农机等液压设备活塞杆防尘。
产品材质：丁睛(NBR)、氟胶(FKM)、聚氨酯(PU)
耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C PU: - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C }
产品介质：液压油、润滑油、乳化液、清水、高温油品以及酸碱化学腐蚀介质。
丁腈橡胶硬度： { \mathsf { H S 7 5 } } ^ { \circ } A
Product Usage:Used for dust prevention of the pistonrodof reciprocating hydraulic cylinders.
FAdust ring isa single-lip embedded reciprocating motion dust ring without a frame,featuring a compact structure,saving installation space,and easyassemblyand disassembly.Itiscommonly made of three mainstream materials:NBR,PU, and FKM.NBR is oil-resistant and general-purpose, PUishighlywear-resistant,andFKMhas the characteristics of high-temperature resistance, acidand alkali resistance,and chemical corrosion resistance.Itissuitable forharsh high-low temperature and special medium working conditions. The overall friction resistance is low,which can effectivelyremovedust,sand,andmetal debris from the piston rod surface,prevent external impurities from entering thecylinder,protect internal seals and guideparts,and iswidelyused in hydraulic equipment piston rods of construction machinery,machine tools,agricultural machinery, etc.for dust prevention.
ProductMaterials:Nitrile(NBR), Fluororubber (FKM),Polyurethane (PU) Temperature Range:NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } ~ + 2 4 0 ^ { \circ } { C } PU: - 3 0 ^ { \circ } { C } { ~ } + 8 0 ^ { \circ } { C } ProductMedia:Hydraulic oil,lubricatingoil, emulsion,clean water,high-temperature oil products, and acid-base chemical corrosive media.
Nitrilerubberhardness: { { H S } } 7 5 ^ { \circ } { \bf A }
Polyurethane hardness: { { H S } } 8 5 ^ { \circ } { \bf A }
Standard Source:GB10708.8-86
Groove Conformity:GB6578-86
DHS型双作用防尘密封件
DHSTYPEDOUBLE-ACTINGDUST-PROOFSEALINGELEMENT
DHS双作用防尘密封件为双唇结构，兼具防尘与回油密封双重功能，外唇可刮除灰尘砂石杂质，内唇回收油液防止渗漏，耐磨性能好、摩擦阻力小、安装简易，适配液压油、乳化液等介质，广泛应用于工程机械、注塑机、机床、冶金及农机等设备的液压油缸活塞杆部位。
产品材质：丁腈(NBR)、氟胶(FKM)、聚氨酯(PU)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C PU: - 3 0 ^ { \circ } mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C } 硬度：90A速度：最高1m/s
The DHS double-acting dust-proof sealing elementhasadouble-lipstructure,featuringboth dust-proof and oil-recycling sealing functions. The outer lip can remove dust,sand,and impurities, while the inner lip recovers the oil to prevent leakage.Ithasexcellentwearresistance,low friction resistance,and is easy to install.It is suitableforhydraulicoil,emulsifiedoil,and othermediaandiswidelyusedinhydraulic cylinderpiston rods of equipment suchas construction machinery,injection molding machines,machine tools,metallurgy,and agriculturalmachinery.
Productmaterials:NBR,FK,PU
Temperature range:
NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C }
FKM: - 2 0 ^ { \circ } { C } ~ + 2 4 0 ^ { \circ } { C }
PU: - 3 0 ^ { \circ } { C } { ~ } { + } 8 0 ^ { \circ } { C }
Hardness:90A
Speed:Maximum { 1 m / s }
WP6型活塞杆防尘密封圈
WP6TYPEPISTONRODDUST-PROOFSEALINGRING
产品介绍：WP6型是用于大直径活塞杆的防尘密封件，沟槽设计采用FreudenbergP6系列，广州机械研究所WP6标准；具有良好的刮尘作用，安装和拆卸简便，耐磨，采用高性能丁晴橡胶NBR材质或耐高温氟胶FKM材质，可以降低摩擦力，使用寿命长。
产品材质：丁腈(NBR)、氟胶(FKM)、耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C
安装：为避免密封唇损坏，安装时应当采取措施避开锐边。
介质：通用石油基液压油、水乙二醇液压 油、油、水乳化型液压油、水、空气
Product Introduction:TheWP6 model isa dust-proof sealing component for large-diameter pistonrods.The groove designadopts the Freudenberg P6 series and the Guangzhou Mechanical Research Institute WP6 standard.It has a good dust-scraping effect,iseasyto install and disassemble,andis wear-resistant.Itismadeofhigh-performance NBR material or high-temperature-resistant FKM material,which can reduce friction and has a long service life.
ProductMaterials:NBR,FKM
Temperature Range:NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C }
FKM: - 2 0 ^ { \circ } { C } ~ + 2 4 0 ^ { \circ } { C }
Installation:To avoid damage to the sealing lip,measures should be taken to avoid sharp edgesduringinstallation.
Media:General petroleum-basedhydraulic oil,water ethylene glycol hydraulic oil,oil, wateremulsified hydraulic oil,water,air
WA1橡胶防尘密封圈
WA1RUBBERDUST-PROOFSEALINGRING
特点：防尘圈WA1具有结构简单，截面小，安装方便，成本低等特点。用于油缸防止污染物混入液压系统和密封系统。广泛应用于工程机械、机床、注塑机、农机及各类液压气动油缸活塞杆防尘防护。
产品材质：丁腈(NBR)、聚氨酯(PU)耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C PU: - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C }
性能：非常好的刮擦除尘作用外圆定位可靠防尘圈可在很宽的温度范围内使用在密封圈和防尘圈之间不会产生背压工作介质：液压油、水、乳化液
Features:The dust seal WA1 has thecharacteristics of simple structure,small cross-section,convenient installation,and low cost.It is used to prevent contaminants from entering the hydraulic system and sealing systemof the oil cylinder.Itis widely applied in constructionmachinery,machine tools, injection molding machines,agricultural machinery, and varioushydraulic and pneumatic oil cylinder piston rods for dust protection.
Productmaterial:NBR,PU Temperature range: NBR: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } PU: - 3 0 ^ { \circ } { C } { ~ } + 8 0 ^ { \circ } { C } Performance:Excellentscratchanddust removal effect Outercircle positioning is reliable The dust seal can beused inawide temperaturerange
No back pressurewill be generated between the sealing ring and the dust seal
Workingmedium:Hydraulic oil,water, emulsion
A1型双台阶防尘圈
A1TYPEDOUBLESTEPDUSTRING
A1型双台阶防尘圈的功能是防止灰尘，污物，沙粒及金属屑进入，通过特殊的设计，防止刮伤，保护导向元件，延长密封件的使用寿命。有过盈量的直径可保证密封件紧紧装入沟槽中，从而防止杂质微粒和湿气的侵入。
A1双台阶型防尘圈对缸体提供了密闭腔体无需螺钉和托架，不必严格的公差，也无金属插件，防止了像金属骨架防尘圈可能发生的腐蚀现象，沟槽也无需严格的公差。
产品材质：聚氨酯(PU)
耐温范围：PU： - 3 0 ^ { \circ } mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C }
主要特点：刮尘效果好、耐磨性好、使用寿命长、应用广泛、较易安装、压缩变形小。
产品用途：A1型防尘圈用于液压缸和气缸的轴向运动杆、柱塞和轴套上。
表面速度： >=slant 1 \mathsf { m } / \mathsf { s }
0
C
The function of the Al type double-step dust-proof ringis to prevent dust,dirt,sand particles and metal shavings fromentering.Throughaspecial design,it prevents scratchesand protects the guiding elements,thereby extending the service life of the sealing components.The diameter with an over Output volume can ensure that the sealing component is tightly fitted into the groove,thus preventing the intrusion of impurity particles and moisture.
The Al double-step type dust-proof ring provides a sealedcavityforthecylinderbodywithout the need for screws and brackets,without strict tolerances,andwithoutmetal inserts.Thisprevents the corrosionphenomenon thatmay occurwith metal frame dust-proof rings.The tolerances for the grooves are also not strict.
Productmaterial:PU
Temperature range:PU: - 3 0 ^ { \circ } { C } { ~ } + 8 0 ^ { \circ } { C } （204号
Main features:Good dust-proof effect, good wearresistance,long service life,wide application, easyinstallation,small compression deformation.
Productapplication:TheA1 type dust-proof ringisused on theaxialmovement rods,pistonsand bushingsofhydrauliccylinders and pneumatic cylinders.
Surface speed: >= 1 { \mathbf { m } } / { \mathbf { s } }
JB超薄防尘圈
JBULTRA-THINDUSTRING
产品用途：本标准适用于液压油缸活塞杆起防尘作用的密封件。
产品特点：JB防尘圈结构简洁紧凑、弹性好、贴合紧密，刮尘防尘效果优异、摩擦阻力小、耐磨耐用且安装方便，适配常规液压用油类介质，广泛应用于工程机械、机床、注塑机、农机及通用液压油缸活塞杆的防尘防护。
产品材质：聚氨酯(PU)
耐温范围：PU： - 3 0 ^ { \circ } \mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C }
工作压力：32MPa
工作介质：液压油、水
产品硬度： 8 5 \mathsf { A } ± 5
标准来源：JBZQ4267-86原QZB336-77
ProductApplication:This standard isapplicable to the sealing components that prevent dust from enteringthe pistonrodofhydraulic cylinders.
Product Features:The JB dust-proof ring has a simple and compact structure,good elasticity, tight fit,excellent dust-proof and dust-repellent effect,low friction resistance,wear resistance and durability,andis easy to install.Itis suitable forconventionalhydraulicmediaandwidelyused in the dust-proof protection of construction machinery,machine tools,injection molding machines,agriculturalmachineryand general hydraulic cylinderpiston rods.
ProductMaterial:PU
Temperature Resistance Range:
PU: - 3 0 ^ { \circ } { C } { ~ } { + } 8 0 ^ { \circ } { C }
WorkingPressure:32MPa
WorkingMedium:Hydraulic oil,water
Product Hardness: 8 5 \mathbf { A } ± 5 （204号
Standard Source:JBZQ4267-86 iginal QZB336-7
DKBI型防尘骨架油封密封圈 DKBITYPEDUSTPROOFSKELETONOILSEALSEAL
产品用途：除去往复运动活塞杆漏在缸外部表面上所附着的尘土、灰砂、雨水等污物，防止外部杂质进入密封机构内部。
工作介质：液压油、燃油、润滑油、无机酸等
产品材质：聚氨酯 ( \mathsf { P U } ) + 碳钢
耐温范围： \mathsf { P U } + 碳钢： - 3 0 ^ { \circ } mathsf { C } ~ + 8 0 ^ { \circ } \mathsf { C }
产品特点：
1.具有良好的耐腐蚀特性2.对不同燃料和润滑油的稳定性、优异性3.具有良好的耐磨性4.抗老化，使用寿命长适用范围：高频、高速、外部环境恶劣的工况工作速度： <=slant 1 \mathsf { m } / \mathsf { s } 产品硬度：92A
ProductUsage:Removes dust,sand,rainwater andother contaminants adhering to the outer surface of the reciprocating piston rod that leaks outof the cylinder,preventing external impurities from entering the sealing mechanism.
WorkingMedium:Hydraulicoil,fuel, lubricating oil, inorganic acid, etc.
ProductMaterial:PU ^ + carbonsteel
Temperature Resistance Range:
PU ^ + carbon steel: \mathbf { - } 3 0 ^ { \circ } \mathbf { C } to + 8 0 ^ { \circ } { C }
Product Features:
1.Possessing excellent corrosion resistance
properties 2.Stabilityand superioritytowardsvarious
fuelsand lubricants 3.Exhibiting good wear resistance 4.Anti-aging and long service life Application scope:High-frequency,
high-speed,harsh external working conditions Working speed: <= 1 { \mathbf { m } } / { \mathbf { s } } （204号 Product hardness:92A
DKB外铁壳骨架油封防尘圈
DKBOUTERIRONSHELLSKELETONOILSEALDUSTRING
产品作用：DKB铁壳防尘圈的主要作用是刮去活塞杆表面上的粉尘、污物、沙粒或细屑，有效防止外部灰尘和杂质进入密封机械内部。该防尘圈结构简单，便于沟槽加工，能够节省安装空间，内侧的密封唇结构能够在活塞杆上保留正常工作的残留油膜，起到辅助密封的作用，确保系统的密封性能。
产品材质：丁睛 ( N B R ) + 碳钢耐温范围： N B R + 碳钢： - 3 0 ^ { \circ } \mathsf { C } ~ + 1 0 0 ^ { \circ } \mathsf { C }
适用范围：液压缸的活塞杆或活塞杆的出口端盖，适用于各种液压系统，特别是在工程机械油缸防尘中表现出色。
往复速度： <=slant 1 \mathsf { m } / \mathsf { s } 产品硬度：92A
Product Function:The main function of the DKB iron shell dust shield is to remove dust, dirt, sandparticlesorfinedebrisfromthesurfaceof thepiston rod,effectivelypreventing external dustand impurities from entering the sealed mechanical interior.This dust shield has a simple structure and is easyto process grooves,which can save installation space.The sealing lip structure on the inner side can retain the normal working residual oil film on the piston rod,playing an auxiliary sealingrole and ensuring the sealing performance of the system.
ProductMaterial:NBR ^ + CarbonSteel
Temperature Resistance Range:
NBR ^ + Carbon Steel: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C }
Application Scope:Pistonrodofhydraulic cylindersorthe outlet end coverof the piston rod,suitable for various hydraulic systems, especiallyperformingwell in dust prevention ofconstruction machinery hydraulic cylinders.
Repetitive Speed: <= 1 { \mathbf { m } } / { \mathbf { s } }
ProductHardness:92A
K30/PDR内骨架防尘圈
K30/PDRINNERSKELETONDUSTPROOFRING
K30/PDR是单作用内骨架防尘圈密封组合，由使用特殊生产方法的弹性丁腈橡胶硫化的金属组成。
K30防尘圈密封件通过弹性挡圈安装在壳体内。密封部分被弹性挡圈推入并固定。组装工具必须是柔软且没有锋利的边缘材料。在安装之前，须用系统油涂上油。
产品材质：丁腈(NBR) ^ + 碳钢氟胶（FKM） ^ + 碳钢耐温范围：N B R + 碳钢： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C \mathsf { F K M + } 碳钢： - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C 工作介质：通用石油基液压油，水乙二醇液压油、油一水乳化型液压油。
产品优势：
1.卓越的防尘效果2.卓越的密封效果3.能在恶劣的条件下工作4.在金属环的作用下，对温度变化有良好的适应性。
往复速度： <=slant 1 . 0 \mathsf { m } / \mathsf { s }
K30/PDRisasingle-actinginternal skeleton dust seal assembly,composed ofa metal reinforced byvulcanizedelasticnitrilerubberproduced using special manufacturingmethods.
TheK3o dust seal component is installed in the housing with an elastic retaining ring.The sealingpartispushedinand fixedbytheelastic retainingring.The assembly tool must be soft and have no sharp edges.Before installation,it is necessary to apply oil with system oil.
Productmaterial: NBR ^ + carbonsteel \mathbf { F K M + } carbonsteel Temperature resistance range: NBR ^ + carbon steel: - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C } （204号 \mathbf { F K M + } carbon steel: - 2 0 ^ { \circ } { C } to + 2 4 0 ^ { \circ } { C } （204号 Workingmedium:General petroleum-based hydraulic oil,waterethylene glycol hydraulic oil,oil-wateremulsion hydraulic oil.
Product advantages:
1.Excellent dust-proof effect 2.Excellent sealing effect 3.Capable of workingunder harsh conditions 4.Has good adaptability to temperature changes under the action of the metal ring.
Repetitive speed: <= 1 . 0 \mathbf { m } / \mathbf { s }
复合材料导向带COMPOSITEMATERIALGUIDEBELT
复合材料导向带
产品特点：导向带具备低摩擦、自润滑、高耐磨、抗侧载的优势，能对活塞杆、活塞起到精准直线导向作用，避免运动部件金属直接接触，防止偏磨、拉缸和密封件损坏；同时耐油耐腐蚀、耐温范围广、形变稳定性强，安装简单适配性高，还可减震降噪，适用于液压缸、气缸及各类工程机械，有效提升设备运行平稳性和使用寿命。
产品材质：四氟铜粉、酚醛树脂耐温范围：四氟铜粉： - 2 0 ^ { \circ } \mathsf { C } ~ + 2 0 0 ^ { \circ } \mathsf { C } 酚醛树脂： - 2 0 ^ { \circ } C ~ + 1 2 0 ^ { \circ } C 工作介质：液压油、压缩空气标准来源：GB/T15242.2-94
活塞用导向带长度 \mathsf { L } = π \left( \mathsf { D } + \mathsf { B } \right) - Z 活塞杆用导向带长度 \scriptstyle \mathsf { L } = π \left( \mathsf { D } + \boldsymbol { \mathsf { B } } \right) - Z （20
Composite material guide belt
Product features:The guide belt has the advantages of low friction,self-lubrication,high wear resistance, and resistance to lateral load.It can provide precise linear guidance for the piston rod and piston, avoiding direct metal contact between moving partsand preventingwear,cylinderdeformation, anddamageto sealingcomponents.Atthe same time,itisresistanttooil,corrosion,hasawide temperaturerange,and strongdeformationstability The installationis simple and the adaptability is high.It can also reduce vibration and noise, and issuitable for hydraulic cylinders,pneumatic cylinders,and various construction machinery, effectively improvingthe stabilityand service life of the equipment.
Productmaterials: PTFE+Bronze,Phenolic resin Temperature range: PTFE+Bronze: - 2 0 ^ { \circ } { C } ~ + 2 0 0 ^ { \circ } { C } Phenolic resin: - 2 0 ^ { \circ } { C } ~ + 1 2 0 ^ { \circ } { C } Working medium:Hydraulic oil, compressed air
Standard source:GB/T15242.2-94
The length of the guide belt for thepiston is { \bf L } = π ( { \bf D } + { \bf B } ) * { \bf Z } The length ofthe guide belt forthe piston rod is { { L } } = π ( { \mathsf { D } } + { \mathsf { B } } ) * { \mathsf { Z } }
导向环
GUIDE RING
产品用途：本标准适用于液压缸或气缸的活塞或活塞杆上的、支撑活塞或活塞杆运动的零件，它能防止活塞或活塞杆在运动过程中与缸体发生直接接触和摩擦，起到保护缸体与活塞或活塞杆不被损坏的作用。
产品材质：四氟铜粉、酚醛树脂、聚甲醛(POM)
耐温范围：
四氟铜粉： - 2 0 ^ { \circ } \mathsf { C } ~ + 2 0 0 ^ { \circ } \mathsf { C }
酚醛树脂： - 2 0 ^ { \circ } C ~ + 1 2 0 ^ { \circ } C
POM: - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C
工作介质：液压油、乳化液、压缩空气、
水
产品硬度： 9 5 \mathsf { A } ± 5
000 0O O0
ProductApplication:Thisstandard isapplicable to the parts on the piston or piston rod of hydraulic cylinders or pneumatic cylinders that support the movement of the piston or piston rod.It can prevent the piston or piston rod from directly contacting and rubbing against the cylinder body during movement,therebyprotectingthecylinderbody and the piston or piston rod from damage.
ProductMaterials:
PTFE+Bronze,Phenolic resin,POM Temperature Range: PTFE+Bronze: { \bf - } 2 0 ^ { \circ } { \bf C } { \bf { ~ } } + 2 0 0 ^ { \circ } { \bf C } Phenolic resin: - 2 0 ^ { \circ } { C } ~ + 1 2 0 ^ { \circ } { C } POM: - 3 0 ^ { \circ } { C } \mathord { ~ } + 1 0 0 ^ { \circ } { C } WorkingMedium:Hydraulic oil,emulsion, compressedair,water ProductHardness: 9 5 \mathbf { A } ± 5 （20
Mx型轴用导程环
MXTYPEGUIDERINGFORAXES
产品用途：导程环有四氟铜粉、酚醛树脂、聚甲醛三种材质可选，核心作用是支撑导向、减磨抗偏载，保护油缸密封件与缸体。其中四氟铜粉款低摩擦耐高温，适配伺服油缸、化工设备；酚醛树脂款高承载抗冲击，适合工程机械、矿山设备；聚甲醛款经济耐用，适配绝大多数通用液压、气动设备。
产品材质：四氟铜粉、酚醛树脂、聚甲醛(POM)耐温范围：四氟铜粉： - 2 0 ^ { \circ } \mathsf { C } ~ + 2 0 0 ^ { \circ } \mathsf { C } 酚醛树脂： - 2 0 ^ { \circ } C ~ + 1 2 0 ^ { \circ } C POM: - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C 工作介质：液压油、压缩空气、水
ProductUsage:The lead ring isavailable in three materials:PTFE+Bronze,Phenolic resin, POM.Its main function is to support the guide, reduce friction,resist eccentric load,and protect thecylindersealandcylinderbody.TheTeflon copper powdermodel has low frictionand high temperature resistance,suitable for servo cylinders and chemical equipment; the phenolic resin model hashighload-bearingcapacityandimpact resistance,suitable for construction machinery andmining equipment; thepolyoxymethylene model is economical and durable,suitable for most general hydraulicand pneumatic equipment.
ProductMaterials: PTFE ^ { + } Bronze phenolic resin,POM Temperature Range: PTFE+Bronze: { \bf - } 2 0 ^ { \circ } { \bf C } { \bf - } { \bf + } 2 0 0 ^ { \circ } { \bf C } Phenolic resin: - 2 0 ^ { \circ } { C } \mathord { ~ } + 1 2 0 ^ { \circ } { C } POM: - 3 0 ^ { \circ } { C } ~ + 1 0 0 ^ { \circ } { C } WorkingMedium:Hydraulic oil, compressedair,water ProductHardness: 9 5 \mathbf { A } ± 5
四氟垫片轴用挡圈
PTFEGASKETAXIALUSERETAININGRING
产品用途：本标准适用于油缸工作压力大于10MPa时配合轴用密封圈使用，或油缸偏心受力，起保护密封圈的作用。
产品材质：PTFE
耐温范围：PTFE： - 2 0 ^ { \circ } \mathsf { C } ~ + 2 0 0 ^ { \circ } \mathsf { C }
功能优势：
1.耐高温2.耐低温，具有良好的机械韧性。3.耐腐蚀，对大多数化学药品和溶剂，表现出惰性、能耐强酸强碱和各种有机溶剂。4.耐气候，有塑料中最佳的老化寿命。5.高润滑，是固体材料中摩擦系数最低者。6.不粘附，是固体材料中最小的表面张力，不粘附任何物质。
工作介质：液压油、乳化液、水工作硬度： 9 2 A ± 5 标准来源：企业标准
CD
CQO 00品
四氟铜粉垫片 四氟 ^ + 碳纤维垫片
四氟 ^ + 石墨垫片 四氟+聚苯脂垫片0800CCeCOO
ProductUsage:Thisstandardisapplicable for use with shaft seals when the working pressure of the cylinderis greater than 1 0 \ { M P a } ,orwhen the cylinder is subjected to eccentric force,serving asaprotective function for the seal ring.
ProductMaterial:PTFE
Temperature Range:
PTFE: - 2 0 ^ { \circ } { C } to + 2 0 0 ^ { \circ } { C }
Functional Advantages:
1.HighTemperatureResistance 2.Low Temperature Resistance,with good mechanical toughness. 3.Corrosion Resistance,showing inertness towards most chemical substances and solvents,capable of withstanding strongacids, strongalkalis,and various organic solvents. 4.Weather Resistance,having the best aging life among plastics. 5.High Lubrication,being the material with the lowest friction coeficient among solid materials. 6.Non-adhesion,having the smallest surface tensionamongsolidmaterials,notadhering to any substances.
QY-D气缸孔用密封圈
QY-DSEALINGRINGFORCYLINDERHOLE
产品用途：本标准适用于各种气缸活塞中起往复运动的密封件。
产品材质：丁腈(NBR)、氟胶(FKM)、聚氨酯(PU)
耐温范围：NBR： - 3 0 ^ { \circ } ( ~ + 1 0 0 ^ { \circ } C FKM: - 2 0 ^ { \circ } C ~ + 2 4 0 ^ { \circ } C PU: - 3 0 ^ { \circ } ( ~ + 8 0 ^ { \circ } C
产品特点：易安装，密封性能好。
工作介质：含油润滑的空气、干燥空气、无油空气 (装配时须初始润滑)
安装：为避免密封唇口的损坏，安装时不要将密封件在锐边上拉动。在无油润滑的情况下，为确保密封件有较长的使用寿命。在装配前，在密封面上涂抹润滑油。
7 5 \mathsf { A } ± 5
0 品Y 心
ProductApplication:This standard isapplicable to various sealing components used for reciprocating motion in cylinder pistons.
ProductMaterials:NBR,FK,PU Temperature Range: NBR: - 3 0 ^ { \circ } { C } to + 1 0 0 ^ { \circ } { C } FKM: - 2 0 ^ { \circ } { C } to + 2 4 0 ^ { \circ } { C } PU: - 3 0 ^ { \circ } { C } to + 8 0 ^ { \circ } { C } Product Features:Easy installation, excellentsealingperformance.
WorkingMedium:Oiled lubricated air,dry air,airwithout oil (initial lubrication is required duringassembly)
Installation:To avoid damage to the sealing lip,do not pull the sealing component along sharp edges during installation.In the absence of oil lubrication,to ensurea longer service life of the sealing component.Before assembly,apply lubricating oil on the sealing surface.
