该页无缩略图
SHANGHAI UPG INTERNATIONAL INDUSTRY & TRADE GROUP CO., LTD.
This fully automatic energy-saving blow molding machine is equipped with an 18L accumulator-type die head.It can
manufacture hollow products with capacities up to 160L, including water drums, oil tanks, automotive parts and more.
Featuring a unique 3-cylinder plus 2-pillar clamping system, the machine boasts robust structure, even force distribution
and extended service life.
Fitted with premium linear guide rails, the equipment runs at higher traveling speed with reduced power consumption
and improved production yield.
LQBA120-160L Fully Automatic 160L Blow Molding Machine Max. Product Volume 160 L Max.Mold Size(W×H) 160 L
Suitable Raw Material PE, PP Die Head Type Accumulator die head Dry Cycle 300 Pcs/h Accumulator Capacity 18 L Screw Diameter 120 mm Max.Die Diameter 480 mm Screw L/D Ratio 28 L/D Die Head Heating Power 25 Kw Screw Drive Power 75-90 Kw Die Head Heating Zone 5 Zone Screw Heating Power 30 Kw Blowing Pressure 0.6 Mpa Screw Heating Zone 5 Zone Air Consumption 1.6 m3/min HDPE Output 200-250 Kg/h Cooling Water Pressure 0.3 Mpa Oil Pump Power 45 Kw Water Consumption 180 L/min Clamping Force 800 kn Machine Dimension(L×W×H) 5.8 × 2.9 × 4.7 m Mold Open & Close Stroke 600 - 1500 mm Machine Weight 22 Ton Mold Template Size(W×H) 1120 × 1300 mm Specifications
Features The above technical parameters are subject to the real product. Machine can be customized for special products. 1
This is a 30L all-electric, single-station, single-diehead, three-layer high-speed extrusion blow molding machine tailored
for automated production lines.
It is engineered to produce a full range of 20L~30L packaging containers widely used in chemical and pharmaceutical
sectors.
The machine realizes full-process automatic operations including automatic deflashing, three-stage post-cooling &
shaping, inline weighing and leakage testing during production.
Featuring high automation level and all-electric energy-efficient construction, the production line meets modern
manufacturing demands for cost cutdown and productivity uplift.
LQEB(50+70+60)-30L
All-electric Automatic High-speed Blow Molding Machine
Raw Material PE...... Mold platen size(W×H) 650 × 650 mm
Max. Product Volume 30 L Max mold size(W×H) 620 × 600 mm
Dry Cycle 620 Pcs/h Mold thickness range 560 ± 5 mm
Inner/Middle/Outer Screw Diameter 50 mm 70mm 60mm Max. die diameter 230 mm
Inner/Middle/Outer Screw L/D ratio 30 L/D Die head heating power 15.4 Kw
Inner/Middle/Outer Screw motor power 18.1Kw 39.3Kw 22.3Kw Die head heating zone 8 Zone
Inner/Middle/Outer Screw heating power 8 Kw 14.5 Kw 11 Kw Blowing pressure 0.7 Mpa
Inner/Middle/Outer Screw heating zone 4 Zone Cooling Water Pressure 0.4 Mpa
HDPE output 65Kg/h 110Kg/h 75Kg/h Water Consumption 100 L/min
Clamping Force 300 kn Machine Dimension(L×W×H) 6.4 × 3.4 × 3.7 m
Mold opening stroke 560-1000 mm Machine Weight 15 Ton
Mold moving stroke 750 mm
Specifications
Features
Outer Layer
Middle Layer
Inner Layer
The above technical parameters are subject to the real product. Machine can be customized for special products.
2
LQH70-12L/90-12LII
Fully Automatic 12L Blow Molding Machine
This is a single/double-station, single-head, fully automatic extrusion blow molding machine equipped with a crank-arm
clamping system.
It is suitable for producing 1L to 12L PE/PP bottles, such as motor oil bottles and lubricating oil containers.
The machine can be integrated with various automation equipment, helping reduce labor costs and improve production
efficiency.
The die head can be replaced with double, triple, or quadruple dies to produce small-capacity hollow products in multiple
specifications, increasing output while lowering energy consumption.
A liquid filling line function can also be added to expand your product range.
Features
Station
Model
Max. Product Volume
Single Double
LQH70-12L LQH90-12LII
12 L 12 L
Suitable Raw Material PE, PP PE, PP
Dry Cycle 900 Pcs/h 600 × 2 Pcs/h
Screw Diameter 70 mm 90 mm
Screw L/D Ratio 25 L/D 25 L/D
Screw Drive Power 22 Kw 37 Kw
Screw Heating Power 10.8 Kw 21 Kw
Screw Heating Zone 3 Zone 4 Zone
Mold Open & Close Stroke 280 - 750 mm 280 - 750 mm
Specifications
3
Mold Template Size(W×H)
Mold Moving Stroke
570 × 540 mm 570 × 540 mm
620 mm 750 mm
Max. Mold Size(W×H)
Clamping Force
570 × 500 mm 570 × 500 mm
120 Kn 120 Kn
Die Head Type Continuous die head Continuous die head
Max. Die Diameter 200 mm 200 mm
Die Head Heating Power 3 Kw 3 Kw
Die Head Heating Zone 4 Zone 4 Zone
Blowing Pressure 0.6 Mpa 0.6 Mpa
Air Consumption 0.8 m3/min 0.8 m3/min
Cooling Water Pressure
HDPE Output
0.3 Mpa 0.3 Mpa
75 Kg/h 140 Kg/h
Water Consumption
Oil Pump Power
60 L/min 80 L/min
11 Kw 11 Kw
Machine Dimension 4.6 × 2.3 × 2.7 m 5.3 × 3.8 × 2.8 m
Machine Weight 7.8 Ton 11 Ton
The above technical parameters are subject to the real product. Machine can be customized for special products.
4
LQH60-5L/70-5LII
Fully Automatic 5L Blow Molding Machine
This is a single (double)-station, single-head, fully automatic extrusion blow molding machine with a crank-arm clamping
system.
It is suitable for producing 1L to 5L PE/PP bottles, such as cosmetic containers and beverage containers.
The machine can be integrated with various automation equipment, helping to reduce labor costs and improve
production efficiency.
The die head can be replaced with double, triple or quadruple dies to produce small-capacity hollow products in multiple
specifications, increasing output while lowering energy consumption.
A liquid filling line function can also be added to expand the product range.
Features
Station
Model
Max. Product Volume
Single Double
LQH60-5L LQH70-5LII
5 L 5 L
Suitable Raw Material
PE, PP PE, PP
Dry Cycle
1100 Pcs/h 700 × 2 Pcs/h
Screw Diameter
60 mm 70 mm
Screw L/D Ratio
25 L/D 25 L/D
Screw Drive Power
15 Kw 22 Kw
Screw Heating Power
8.1 Kw 10.8 Kw
Screw Heating Zone
3 Zone 3 Zone
Mold Open & Close Stroke
220 - 700 mm 220 - 700 mm
Specifications
5
Mold Template Size(W×H)
Mold Moving Stroke
350 × 425 mm 350 × 425 mm
420 mm 550 mm
Max. Mold Size(W×H)
Clamping Force
350 × 425 mm 350 × 425 mm
70 Kn 70 Kn
Die Head Type
Continuous die head Continuous die head
Max. Die Diameter
150 mm 150 mm
Die Head Heating Power
2.5 Kw 2.5 Kw
Die Head Heating Zone
3 Zone 3 Zone
Blowing Pressure
0.6 Mpa 0.6 Mpa
Air Consumption
0.5 m3/min 0.5 m3/min
Cooling Water Pressure
HDPE Output
0.3 Mpa 0.3 Mpa
60 Kg/h 75 Kg/h
Water Consumption
Oil Pump Power
50 L/min 60 L/min
7.5 Kw 7.5 Kw
Machine Dimension
3.8 × 2.1 × 2.5 m 4.0 × 2.7 × 2.6 m
Machine Weight 4.8 Ton 7 Ton
The above technical parameters are subject to the real product. Machine can be customized for special products.
6
LQHT100-30LII Fully Automatic 12L Blow Molding Machine This high-speed servo-driven blow molding machine is designed for producing bottles up to 30L.
The double-station configuration with a single die head delivers high output, with a production capacity of approximately
130 pieces per day.
Equipped with a crank-arm mold locking unit, it provides greater clamping force than standard models.
It supports a fully automatic production line, including automatic deflashing, waste material handling, and finished bottle
delivery, and can be reliably integrated with other auxiliary equipment.
Features
Suitable Raw Material
Mold Template Size(W×H)
PE, PP Oil Pump Power
620 × 680 mm
22 Kw
Max. Product Volume
Max. Mold Size(W×H)
30* L
Dry Cycle 600 × 650 mm
Die Head Type
400×2 Pcs/h
Screw Diameter Continuous die head
Max. Die Diameter
100 mm
Screw L/D ratio 260 mm
Die Head Heating Power
25 / 28 L/D
Screw Drive Power 10 Kw
Die Head Heating Zone
55 / 75 Kw
Screw Heating Power 5 Zone
Blowing Pressure
19.4 / 22 Kw
Screw Heating Zone 0.6 Mpa
Cooling Water Pressure
4/5 Zone
HDPE Output 0.3 Mpa
Water Consumption
180 / 220 Kg/h
Clamping Force 90 L/min
Machine Dimension(L×W×H)
220 kn
Mold Open & Close Stroke 5.8 × 4.6 × 3.5 m
Machine Weight
420 - 975 mm
Mold Moving Stroke 850 mm 17.5 Ton
Specifications
The above technical parameters are subject to the real product. Machine can be customized for special products. 7
LQSJ-CP SERIES
Linear Full Servo Blow Moulding Machine
The LQSJ-CP Series Linear Full Servo Blow Moulding Machine features a continuous, high-speed preform feeding
system with multiple protection devices for precise preform feeding. It is equipped with a servo motor-driven preform
transfer and fetch system, enabling quick transfer and accurate preform positioning. The blowing and clamping system
adopts a servo-driven design with synchronized base blow moulds for fast-response operation, paired with precision
electromagnetic valves that deliver fast response times and support high-volume production.
Specifications
Features
Theoretical Output
Model
11000 Pcs/h 13500 Pcs/h 18000 Pcs/h 16000 Pcs/h 18000 Pcs/h 21000 Pcs/h
30 mm
LQSJ-CP5L LQSJ-CP6 LQSJ-CP8S LQSJ-CP7L LQSJ-CP8 LQSJ-CP10S
Max. Neck Size 30 mm 30 mm 30 mm 30 mm 30 mm
Max. Volume 2.5 L
350 mm
1.5 L
350 mm
0.75 L
300 mm
2.5 L
350 mm
1.5 L
350 mm
0.75 L
Max. Height 300 mm
Max. Diameter 115 mm 95 mm 70 mm 115 mm 95 mm 70 mm
Number of Cavities
Power
Heating Power 128 Kw
5
220 - 380 V 50 - 60 Hz
6 8 7 8 10
Total Power
Main Body Dimension
(L×W×H)
Main Body Weight
5.2 × 1.8 × 2.3 m 5.8 × 1.8 × 2.3 m
6000 Kg
152 Kw
6500 Kg
The above technical parameters are subject to the real product. Machine can be customized for special products.
8
LQEB60-2L/2-L All-electric Automatic High-speed Blow Molding Machine This 2L all-electric single-station dual-head single-layer high-speed blow molding machine is suitable for producing
10mL-1L small packaging containers for chemical and pharmaceutical industries, featuring automatic deflashing, flash
collection and recycling, on-line finished product leak detection before output, high automation, all-electric energy-saving
design, smooth and quiet operation, meeting modern production needs for cost reduction and efficiency improvement.
Features
Suitable Raw Material PE, PP Mold Template Size(W×H) 320 × 350 mm Max. Product Volume 1 L Max. Mold Size(W×H) 320 × 350 mm Dry Cycle 420 Pcs/h Die Head Type Continuous die head Screw Diameter 60 mm Max. Die Diameter 45 mm Screw L/D ratio 24 L/D Die Head Heating Power 4 Kw Screw Drive Power 17 Kw Die Head Heating Zone 5 Zone Screw Heating Power 8.1 Kw Blowing Pressure 0.6 Mpa Screw Heating Zone 3 Zone Cooling Water Pressure 0.3 Mpa HDPE Output 50 Kg/h Water Consumption 35 L/min Clamping Force 40 kn Machine Dimension(L×W×H) 3.6 × 1.8 × 2.7 m Mold Open & Close Stroke 200 - 400 mm Machine Weight 4.0 Ton Specifications The above technical parameters are subject to the real product. Machine can be customized for special products. 9
LQHT80-5LII/8
Full Automatic 5L Blow Molding Machine
High-speed servo blow molding machine for bottles up to 500ml, with a high production capacity of about 110,000 pcs/
day via a double-station, 8-die-head configuration. Equipped with a crank-arm mold locking unit that delivers greater
clamping force than standard models, this fully automatic production line features auto de-flashing, waste material
handling and finished bottle delivery, and supports seamless integration with other auxiliary equipment.
Features
Station Double Mold Moving Stroke 600 mm
Max. Product Volume 500 ML Template Size(W×H) 550 × 300 mm
Dry Cycle 1400 Pcs/h Center Distance 60 mm
Screw Diameter 80 mm Max. Die Diameter 16 mm
Screw L/D ratio 28 L/D Die Heating Power 9.2 Kw
Screw Drive Power 30 Kw No. of Heating Zone 10 Zone
Screw Heating Power 3.85 × 4 Kw Blowing Pressure 0.6 Mpa
Screw Heating Zone 4 Zone Cooling Water Pressure 0.3 Mpa
HDPE Output 100 Kg/h Water Consumption 85 L/min
Clamping Force 120 kn Machine Dimension(L×W×H) 4.95 × 3.3 × 2.6 m
Mold Stroke 150 - 330 mm Machine Weight 8.0 Ton
Specifications
The above technical parameters are subject to the real product. Machine can be customized for special products.
10
This machine features a horizontal rotation transfer system for easy installation and maintenance, reducing spare parts
replacement costs; a compact preform heating distance design enables efficient heating and lower energy consumption;
CAM linkage-driven mould closing eliminates chain plate pin shafts, resulting in a compact footprint and long service
life; durable hard claws for preform and bottle handling offer excellent wear resistance; a servo motor drive system with
synchronized base blow moulds ensures fast response and precise blowing valves for high output; stainless steel piping
delivers clean, pollution-free air; bottle mould slides simplify installation; and a 9-inch LCD HMI control system ensures
easy operation.
LQB-5SSL/6SS High Speed Blow Moulding Machine Specifications Features Theoretical Output Model 7500 Pcs/h 10000 Pcs/h LQB-5SSL LQB-6SS Max. Neck Size 38 mm 38 mm Max. Volume 2.5 L 360 mm 1.5 L 360 mm Max. Height Max. Diameter 115 mm 95 mm Number of Cavities Power Heating Power 96 Kw 96 Kw 220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz 5 6 Total Power Main Body Dimension (L×W×H) Main Body Weight 4.1 × 1.84 × 2.2 m 4.1 × 1.84 × 2.2 m 4000 Kg 4000 Kg 108 Kw 108 Kw The above technical parameters are subject to the real product. Machine can be customized for special products. 11
This machine features full-process PLC-controlled HMI operation with auto-loading, blowing and dropping, magnetic
induction switches for step monitoring, automatic alarms and fault display; it delivers fast, precise and smooth
performance, with optional cross double crank clamping for strong force and adjustable mould opening stroke to save
time; far infrared lamps heat rotating preforms uniformly with independent temperature control, while the pre-heater
design shortens heating tunnels to reduce energy use; its multi-stage air supply system and clear, reliable valve design
meet diverse product needs, supported by energy-efficient servo motors, automatic lubrication and fully automatic
pollution-free production, combining low investment, high efficiency, easy operation and maintenance, and high safety.
LQB-3S/4S/4SS/6S
Blow Moulding Machine
Specifications
Features
Theoretical Output
Model
3500 Pcs/h 4500 Pcs/h 6000 Pcs/h 6000 Pcs/h
38 mm
LQB-3S LQB-4S LQB-4SS LQB-6S
Max. Neck Size 38 mm 38 mm 38 mm
Max. Volume 2.0 L
350 mm
2.0 L
350 mm
2.0 L
350 mm
2.0 L
Max. Height 350 mm
Max. Diameter 100 mm 100 mm 100 mm 100 mm
Number of Cavities
Power
Heating Power 64 Kw 64 Kw 48 Kw 64 Kw
220 - 380 V 50 - 60 Hz
3 4 4 6
Total Power
Main Body Dimension (L×W×H)
Main Body Weight
3× 1.5 × 2.2 m 3.4× 1.55 × 2.2 m 3.4× 1.55 × 2.2 m 3.85× 1.7 × 2.2 m
2750 Kg 3450 Kg 3450 Kg 3450 Kg
67 Kw 67 Kw 58 Kw 67 Kw
The above technical parameters are subject to the real product. Machine can be customized for special products.
12
The machine adopts PLC control (with time relay control as an optional feature), offering easy maintenance and low cost,
with time control accurate to 0.01 seconds. Its gas circuit includes both moving and blowing functions to meet different
air requirements. The far-infrared heater uses conversion self-rotating heating with rail revolution, ensuring even, fast
and reliable heating. It requires only one operator with no special training, featuring easy installation and simple startup.
LQMS-4/4A
Semi-Automatic Blow Moulding Machine
Specifications
Features
Theoretical Output
Model
2200 Pcs/h 2500 Pcs/h
LQMS-4 LQMS-4A
Max. Neck Size 38 mm 38 mm
Max. Volume 1.5 L
360 mm
1.5 L
Max. Height 360 mm
Max. Diameter 100 mm 100 mm
Number of Cavities
Power
Heating Power
Heater Dimension
32 Kw
1.8 × 0.6 × 1.4 m
32 Kw
1.4 × 0.6 × 1.65 m
220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz
4 4
Total Power
Heater Weight
Main Body Dimension (L×W×H)
Autoloader Dimension (L×W×H)
Main Body Weight
Autoloader Weight
1.9 × 0.9 × 2.2 m
\\
1.9 × 0.9 × 2.2 m
1.4 × 0.7 × 1.8 m
1300 Kg
\\
1300 Kg
150 Kg
33 Kw
230 Kg
33 Kw
230 Kg
The above technical parameters are subject to the real product. Machine can be customized for special products. 13
This machine features a human-machine interface and PLC-controlled automatic process (loading, blowing, dropping)
with step-by-step safety interlock and fault display. It offers high speed, precise positioning, and smooth operation.
Optional cross double crank clamping provides strong force with adjustable mold opening stroke for different bottle sizes.
The far-infrared heating system ensures uniform preform heating with independent zone control; a compact preheater
design saves space and energy. Its multi-stage air supply system supports various products, while automatic lubrication
ensures long machine life. The fully automatic, pollution-free process delivers low investment, high efficiency, easy
operation, and simple maintenance.
LQB-2-10/3-5
Automatic Blowing Machine
Specifications
Theoretical Output
Model
1600 Pcs/h 2500 Pcs/h
LQB-2-10 LQB-3-5
Max. Neck Size 48 mm 48 mm
Max. Volume 10 L
430 mm
7 L
Max. Height 350 mm
Max. Diameter 220 mm 190 mm
Number of Cavities
Power
Heating Power 80 Kw 80 Kw
220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz
2 3
Total Power
Main Body Dimension (L×W×H)
Main Body Weight
3.3 × 2.0 × 2.2 m 4.5 × 2.0 × 2.2 m
3500 Kg 4100 Kg
90 Kw 90 Kw
Features
Model LQB-2-10 LQB-3-5
Max. Neck Size 48 mm 48 mm
Max. Height 430 mm 350 mm
Number of Cavities
Heating Power 80 Kw 80 Kw
2 3
Main Body Dimension (L×W×H) 3.3 × 2.0 × 2.2 m 4.5 × 2.0 × 2.2 m
The above technical parameters are subject to the real product. Machine can be customized for special products.
14
This machine is designed for blowing 0.5–1.5L common PET bottles. It adopts a
durable PLC microcomputer control system with time accuracy up to 0.01 seconds.
The far-infrared heater features self-rotating heating via rail revolution for even,
fast and reliable preform heating, with each lamp having independent temperature
control to achieve optimal results. Its unique preheater design keeps preforms close
during heating, reducing space, shortening the heating tunnel and cutting energy
consumption; the blowing section also adapts to bottle size changes. It is easy to
install and start up.
LQM-3
Automatic Blowing Machine
Specifications
Features
Theoretical Output
Model
2200 Pcs/h
LQM-3
Max. Neck Size 38 mm
Max. Volume 1.5 L
Max. Height 360 mm
Max. Diameter 100 mm
Number of Cavities
Power
Heating Power 32 Kw
220 - 380 V 50 - 60 Hz
3
Total Power
Main Body Dimension (L×W×H)
Main Body Weight
2.3 × 1.5 × 2.2 m
1650 Kg
33 Kw
The above technical parameters are subject to the real product. Machine can be customized for special products. 15
LQSJ-2/2SS/4MS/4SS
Automatic Blowing Machine
This machine features a touch-type color HMI system for easy operation. Its bottle outlet system can be equipped with
a linking unit to connect to a conveyor system, directly delivering finished bottles to subsequent processes or linking to
a filling machine, which reduces secondary bottle pollution and saves labor. The unique modular design supports both
mechanical feeding and manual loading, maximizing the machine’s versatility and advantages.
Specifications
Features
Theoretical Output
Model
2500 Pcs/h 3000 Pcs/h 5000 Pcs/h 6000 Pcs/h
38 mm
LQSJ-2 LQSJ-2SS LQSJ-4MS LQSJ-4SS
Max. Neck Size 38 mm 38 mm 38 mm
Max. Volume 1.5 L
320 mm
1.5 L
320 mm
0.6 L
300 mm
1.5 L
Max. Height 320 mm
Max. Diameter 105 mm 105 mm 65 mm 105 mm
Number of Cavities
Power
Heating Power 60 Kw 60 Kw 80 Kw 80 Kw
220 - 380 V 50 - 60 Hz
2 2 4 4
Total Power
Main Body Dimension (L×W×H)
Main Body Weight
2.7 × 1.6 × 2.2 m 2.7 × 1.6 × 2.2 m 3.3 × 1.6 × 2.2 m 4.6 × 1.6 × 2.2 m
2200 Kg 2200 Kg 2600 Kg 4000 Kg
63 Kw 66 Kw 88 Kw 90 Kw
The above technical parameters are subject to the real product. Machine can be customized for special products.
16
LQSJ-2W/1W/1-20 Hand-inserted Automatic Bottle Blowing Machine This machine is capable of blowing a wide range of PET containers, including carbonated beverage bottles, mineral
water bottles, pesticide bottles, cosmetic bottles and jars. Featuring manual preform loading and automatic bottle
blowing, it requires no technical training for operators, and delivers a stable output of 1,400–2,000 pcs/h with low
operating cost.
Machine Features
Specifications
Theoretical Output
Model
1200 Pcs/h 600 Pcs/h 600 Pcs/h
LQB-2-10 LQB-3-5 LQB-3-5
Max. Neck Size 48 mm 48 mm 48 mm
Max. Volume 3 L
430 mm
5 L 20 L
Max. Height 350 mm 350 mm
Max. Diameter 150 mm 180 mm 300 mm
Number of Cavities
Power
Heating Power 80 Kw 80 Kw
220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz 220 - 380 V 50 - 60 Hz
2 3 3
Total Power
Main Body Dimension (L×W×H)
Main Body Weight
3.3 × 2.0 × 2.2 m 4.5 × 2.0 × 2.2 m
2200 Kg 2200 Kg 2600 Kg
67 Kw 35 Kw 105 Kw
Specifications
Model LQSJ-2W LQSJ-1W LQSJ-1-20
Max. Neck Size 150 mm 150 mm 90 mm
Max. Height 320 mm 360 mm 490 mm
Number of Cavities
Heating Power 64 Kw 32 Kw 102 Kw
2 1 1
Main Body Dimension (L×W×H) 2.8 × 2.0 × 2.2 m 2.6 × 1.9 × 2.2 m 3.1 × 1.9 × 2.2 m
The above technical parameters are subject to the real product. Machine can be customized for special products.
17
LQS SERIES
Semi-automatic Blow Moulding Machine
Theoretical Output
Model
200-900 Pcs/h
LQS-1
Max. Neck Size 90 mm
Max. Volume 7 L
Max. Height 360 mm
Max. Diameter 220 mm
Number of Cavities
Power
Heating Power 9.6 Kw
220 - 380 V 50 - 60 Hz
1-2
Total Power
Main Body Dimension (L×W×H)
Heater Size(L×W×H)
Main Body Weight
Heater Weight
1.5 × 0.65 × 2.0 m
1.4 × 0.6 × 1.4 m
550 Kg
185 Kg
11 Kw
Controlled by a microcomputer, the technical parameters involved can be controlled more accurately.
After process improvement, the formed PET bottle can withstand a temperature of 85 ℃ ,
which solves the problem of traditional food and beverage packaging.
Theoretical Output
Model
200 Pcs/h
LQS-2
Max. Neck Size 38 mm
Max. Volume 3.0 L
Max. Height 360 mm
Max. Diameter 120 mm
Number of Cavities
Power
Heating Power 9.6 Kw
220 - 380 V 50 - 60 Hz
2
Total Power
Main Body Dimension (L×W×H)
Heater Size(L×W×H)
Main Body Weight
Heater Weight
1.5 × 0.65 × 2.0 m
1.4 × 0.6 × 1.4 m
530 Kg
185 Kg
11 Kw
The above technical parameters are subject to the real product. Machine can be customized for
special products.
The above technical parameters are subject to the real product. Machine can be customized for
special products.
18
Theoretical Output
Theoretical Output
Theoretical Output
Model
Model
Model
1800 Pcs/h
150 - 400 Pcs/h 300 - 500 Pcs/h
90-200 Pcs/h
LQS-4
LQS-1-10 LQS-2-5
LQS-1-20
Max. Neck Size
Max. Neck Size
Max. Neck Size
38 mm
120 mm 48 mm
120 mm
Max. Volume
Max. Volume
Max. Volume
3.0 L
10.0 L 5.0 L
20.0 L
360 mm
500 mm 360 mm
550
Max. Height
Max. Height
Max. Height
Max. Diameter
Max. Diameter
Max. Diameter
120 mm
220 mm 210 mm
300 mm
Number of Cavities
Number of Cavities
Number of Cavities
Heating Power
Heating Power
Heating Power
38.4 Kw
38.4 Kw 32 Kw
64 Kw 2
1-2
2
1-2
Total Power
Total Power
Total Power
Main Body Dimension (L×W×H)
Main Body Dimension (L×W×H)
Main Body Dimension (L×W×H)
Heater Size(L×W×H)
Heater Size(L×W×H)
Heater Size(L×W×H)
Main Body Weight
Main Body Weight
Main Body Weight
Heater Weight
Heater Weight
Heater Weight
1.5 × 0.65 × 2.0 m
1.75×0.65×2 m 1.9×0.9×2.2 m
1.75 × 0.78 × 2.0 m
1.8 × 0.6 × 1.4 m
1.8×0.6×1.4 m 1.8×0.6×1.6 m
2.7 × 0.7 × 1.6 m
530 Kg
900 Kg 1300 Kg
1250 Kg
230 Kg
230 Kg 230 Kg
370 Kg
40 Kw
40 Kw 33 Kw
66 Kw
The above technical parameters are subject to the real product. Machine can be customized
for special products.
The above technical parameters are subject to the real product. Machine can be customized
for special products.
The above technical parameters are subject to the real product. Machine can be customized
for special products.
19
BLOW MOULD
We are a professional manufacturer of PET/
PP preform, cap and blow moulds in China,
covering applications in mineral water, soft
drinks, juice and other food & non-food fields.
We offer a full range of PET preform and cap moulds
(including double-lock pneumatic needle valve, ultrashort gate, jar and 5-gallon moulds) with custom design
support. Backed by continuous R&D from our senior
engineering team, our moulds enable customers
to produce high-quality PET preforms and bottles
stably with lower investment, faster startup and lower
maintenance costs.
20
48-cavity preform mould 8-cavity jar preform mould PET PREFORM/CAP MOULD
Application:
-for water, beverage, tea drinks, etc.
-for edible oil and condiment such as soy sauce.
-for cosmetic, health-care products, pharmaceutical, food field.
21
32-cavity flip cap mould 8-cavity flip cap mould
22
SHANGHAI UPG INTERNATIONAL INDUSTRY & TRADE GROUP CO., LTD.
23RD FLOOR MECHANICAL & ELECTRICAL MANSION
NO.600 HENGFENG ROAD SHANGHAI 200070 P.R.CHINA
TEL: 0086-21-6317 3900 0086-21-6353 0603
FAX: 0086-21-6353 8343
MAIL: sales@shanghai-upg.com
WEB: www.shanghai-upg.com
Website Youtube
